Development of stabilised brick and mortar using biomass waste

被引:2
|
作者
Oti, Jonathan E. [1 ]
Kinuthia, John M. [1 ]
机构
[1] Univ South Wales, Fac Comp Engn & Sci, Sch Engn, Civil Engn, Pontypridd, M Glam, Wales
关键词
brickwork & masonry; materials technology; recycling & reuse of materials;
D O I
10.1680/coma.14.00007
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper reports the potential of using cereal ash and bottom ash waste generated from biomass combustion plants for the manufacture of stabilised bricks and sustainable masonry mortar for brick joints and plaster. For the stabilised brick production, the cereal ash waste and bottom ash waste were used as full substitutes for primary clay, while magnesium oxide ash was used as a partial substitute for conventional stabilisers. The blending for the production of the masonry mortar was accomplished by the partial replacement of Portland cement, quicklime or hydraulic lime with large volumes (up to 70%) of cereal ash waste. The properties investigated under this study include material characterisation and compressive strength and durability using freeze-thaw tests. The results obtained suggest that there is potential for the manufacture of sustainable construction materials such as bricks and mortar from cereal ash, bottom ash and magnesium oxide ash waste streams.
引用
收藏
页码:241 / 250
页数:10
相关论文
共 50 条
  • [31] Freeze-thaw of stabilised clay brick
    Oti, J. E.
    Kinuthia, J. M.
    Bai, J.
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-WASTE AND RESOURCE MANAGEMENT, 2010, 163 (03) : 129 - 135
  • [32] Strength relationship of brick masonry, brick and cement-mortar
    Deodhar, S.V.
    Patel, A.N.
    Journal of Structural Engineering (Madras), 1997, 23 (04): : 215 - 218
  • [33] Development the properties of brick geopolymer pastes using concrete waste incorporating dolomite aggregate
    Ouda, Ahmed S.
    Gharieb, Mahmoud
    JOURNAL OF BUILDING ENGINEERING, 2020, 27
  • [34] Studies on the strength variation of brick masonry using novel blended masonry mortar mixes and mortar thickness
    Murthi, P.
    Akib, Md
    Imran, Md
    Ahmed, Shareeq
    Prasanna, V
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 126 - 130
  • [35] Preparation of clay brick using coal waste
    Yoo, JW
    Jung, JH
    Kim, JM
    Lee, SM
    Kim, HT
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2004, 227 : U1061 - U1061
  • [36] Characterization of waste clay brick powder and its effect on the mechanical properties and microstructure of geopolymer mortar
    Sharmin, Shaila
    Sarker, Prabir K.
    Biswas, Wahidul K.
    Abousnina, Rajab M.
    Javed, Usman
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 412
  • [37] Development of green masonry mortar using fine recycled aggregate based on the shear bond strength of brick masonry
    Murthi, P.
    Krishnamoorthi, S.
    Poongodi, K.
    Saravanan, R.
    MATERIALS TODAY-PROCEEDINGS, 2022, 61 : 413 - 419
  • [38] Valorization of concrete and brick waste as sustainable alternatives in Lime Mortar: physical, mechanical, and durability performance
    Raini, Imad
    Raini, Imane
    El Bougrini, Amine
    Cherifix, Hicham
    El Qandil, Mostafa
    JOURNAL OF ECOLOGICAL ENGINEERING, 2025, 26 (05): : 40 - 53
  • [39] EFFECTS OF ELAZIG REGION WASTE BRICK AND LIMESTONE POWDER ON ENGINEERING PROPERTIES OF SELF COMPACTING MORTAR
    Acikgenc, Merve
    Karatas, Mehmet
    Ulucan, Zulfu Cinar
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2013, 19 (06): : 249 - 255
  • [40] Elasticity and fracture of brick and mortar materials using discrete element simulations
    Radi, Kaoutar
    Jauffres, David
    Deville, Sylvain
    Martin, Christophe L.
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2019, 126 : 101 - 116