Study of weld joint strength using sensor signals for various torch angles in pulsed MIG welding

被引：18

作者：

Pal, Kamal ^{[1
]}

Pal, Surjya K. ^{[1
]}

机构：

[1] Indian Inst Technol Kharagpur, Dept Mech Engn, Kharagpur 721302, W Bengal, India

来源：

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2010年 / 3卷 / 01期

关键词：

Weld joint area; Weld toe angle; Weld dilution; Weld ferrite content; Arc power; Arc sound kurtosis;

D O I：

10.1016/j.cirpj.2010.07.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present work focuses on the influence of pulse parameters at various torch angles on the tensile properties of low carbon steel butt weld in pulsed metal inert gas welding. The interface of weld zone and heat affected zone was found to be the weakest area due to significant variation of weld microstructure. The weld bead characteristics strongly influenced the joint strength. An infrared pyrometer and sound sensor have also been used along with arc sensors to monitor the weld quality. The arc power and arc sound kurtosis were found to be strongly correlated with weld quality. (C) 2010 CIRP.

引用

页码：55 / 65

页数：11

共 30 条

[11] Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc welding [J].

Grad, L ;

Grum, J ;

Polajnar, I ;

Slabe, JM .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (05) :555-561

[12]

Grad L, 1996, P 13 BIAM 96 ZAGR, pi17

[13] Acquisition and pattern recognition of spectrum information of welding metal transfer [J].

Han, GM ;

Yun, SH ;

Cao, XH ;

Li, JY .

MATERIALS & DESIGN, 2003, 24 (08) :699-703

[14] Influence of GMAW-P current waveforms on heat input and weld bead shape [J].

Joseph, A ;

Farson, D ;

Harwig, D ;

Richardson, R .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (03) :311-318

[15] The effect of process parameters on penetration in gas metal arc welding processes [J].

Karadeniz, Erdal ;

Ozsarac, Ugur ;

Yildiz, Ceyhan .

MATERIALS & DESIGN, 2007, 28 (02) :649-656

[16]

Kumar R., 2008, INT J ADV MANUF TECH, DOI [10.1007/s00170-008r-r1568-4, DOI 10.1007/S00170-008R-R1568-4..]

[17] Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA welding [J].

Kumar, Rakesh ;

Dilthey, Ulrich ;

Dwivedi, D. K. ;

Ghosh, P. K. .

MATERIALS & DESIGN, 2009, 30 (02) :306-313

[18]

LUKSA K, 2003, WELD INT, V17, P438, DOI DOI 10.1533/WINT.2003.3139

[19]

Mansoor A., 1997, THESIS

[20]

Nouri M, 2007, J MATER SCI TECHNOL, V23, P817

← 1 2 3 →