CORROSIVITY OF BR- AND CL- ON DUPLEX STAINLESS-STEEL

被引：8
|
作者：
YAMAMOTO, K
HOSOYA, K
机构：
[1] Materials Engineering Department, Research and Development Division, JGC Corporation, Minami-ku, Yokohama, 232, 14-1
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1995年 / 198卷 / 1-2期
关键词：
MATERIAL SELECTION; DUPLEX STAINLESS STEEL; STRESS CORROSION CRACKING; PITTING; CREVICE CORROSION; BROMIDE AND CHLORIDE ENVIRONMENTS;
D O I：
10.1016/0921-5093(95)80079-A
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This report discusses the basis for material selection in chemical plants, especially focusing on the design of an actual plant based on laboratory corrosion test results. Both the chemical system created when chlorine gas and bromine gas were neutralized with alkaline solution, and material economics are considered when selecting duplex stainless steel as a construction material. In addition, the corrosivity of Br- and Cl- with or without BrO- and ClO- on duplex stainless steel is discussed in terms of pitting and crevice corrosion. Br- ions show a lower tendency to promote pitting and crevice corrosion on duplex stainless steel, compared with Cl- ions. BrO-, existing in a bromine gas neutralization system, acts as a strong oxidizer and easily shifts the corrosion potential of duplex stainless steel more noble, drastically promoting crevice corrosion.
引用
收藏
页码：239 / 243
页数：5
相关论文
共 50 条
  • [21] Hot cracking in duplex stainless steel weldments - a review
    Westin, Elin M.
    WELDING IN THE WORLD, 2022, 66 (08) : 1483 - 1499
  • [22] Effects of minor additions of ruthenium on the passivation of duplex stainless-steel corrosion in concentrated hydrochloric acid solutions
    Sherif, El-Sayed M.
    Potgieter, J. H.
    Comins, J. D.
    Cornish, L.
    Olubambi, P. A.
    Machio, C. N.
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2009, 39 (08) : 1385 - 1392
  • [23] Effect of number of deposition layers on the microstructure, corrosion and fretting wear of duplex stainless-steel weld cladding
    Thakur, Ravi Kumar
    Kishore, Kaushal
    Shajan, Nikhil
    Kumar, D. Vijay
    Kumar, B. Nirmal
    Prabhakaran, Anand
    Paul, Surajit Kumar
    Tiwari, Mayank
    Arora, Kanwer Singh
    SURFACE & COATINGS TECHNOLOGY, 2025, 502
  • [24] The Role of Nitrogen Gas and PWHT on Pitting Corrosion Behavior of Duplex Stainless-Steel Joint Made by GTAW
    Tahaei, Ali
    Abbasi, Mahmoud
    Vanani, Behrouz Bagheri
    Zanotto, Federica
    Perez, Argelia Fabiola Miranda
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2024, 13 (04) : 624 - 639
  • [25] Magnetic characterisation of duplex stainless steel
    Mészáros, I
    PHYSICA B-CONDENSED MATTER, 2006, 372 (1-2) : 181 - 184
  • [26] EFFECT OF GAMMA-PHASE ON CORROSIVE WEAR OF DUPLEX STAINLESS-STEEL IN SULFURIC-ACID-SOLUTION
    LU, XC
    LI, SZ
    JIANG, XX
    ZHANG, TC
    CORROSION, 1995, 51 (06) : 456 - 462
  • [27] In Situ Observation and Phase-Field Simulation Framework of Duplex Stainless-Steel Slab during Solidification
    Wang, Tong
    Wexler, David
    Guo, Liangliang
    Wang, Yangfan
    Li, Huijun
    MATERIALS, 2022, 15 (16)
  • [28] Effects of minor additions of ruthenium on the passivation of duplex stainless-steel corrosion in concentrated hydrochloric acid solutions
    El-Sayed M. Sherif
    J. H. Potgieter
    J. D. Comins
    L. Cornish
    P. A. Olubambi
    C. N. Machio
    Journal of Applied Electrochemistry, 2009, 39
  • [29] DIFFUSION OF HYDROGEN IN(α+γ)DUPLEX STAINLESS STEEL
    HE Jianhong TANG Xiangyun CHEN Nanping Tsinghua University
    Acta Metallurgica Sinica(English Edition), 1989, (04) : 274 - 278
  • [30] A study on boronizing of duplex stainless steel
    Hasan, R
    Jauhari, I
    Yunus, SM
    Ramdan, RD
    Masdek, NRN
    FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 : 887 - 891
12345