Breakdown and Evolution of the Protective Oxide Scales of AISI 304 and AISI 316 Stainless Steels under High-Temperature Oxidation

被引：47

作者：

Habib, K. A. ^{[1
]}

Damra, M. S. ^{[1
]}

Saura, J. J. ^{[1
]}

Cervera, I. ^{[1
]}

Belles, J. ^{[1
]}

机构：

[1] Univ Jaume 1, Dept Ingn Sistemas Ind & Diseno, Castellon de La Plana 12071, Spain

来源：

INTERNATIONAL JOURNAL OF CORROSION | 2011年 / 2011卷

关键词：

D O I：

10.1155/2011/824676

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

The failure of the protective oxide scales of AISI 304 and AISI 316 stainless steels has been studied and compared at 1,000 degrees C in synthetic air. First, the isothermal thermogravimetric curves of both stainless steels were plotted to determine the time needed to reach the breakdown point. The different resistance of each stainless steel was interpreted on the basis of the nature of the crystalline phases formed, the morphology, and the surface structure as well as the cross-section structure of the oxidation products. The weight gain of AISI 304 stainless steel was about 8 times greater than that of AISI 316 stainless steel, and AISI 316 stainless steel reached the breakdown point about 40 times more slowly than AISI 304 stainless steel. In both stainless steels, reaching the breakdown point meant the loss of the protective oxide scale of Cr2O3, but whereas in AISI 304 stainless steel the Cr2O3 scale totally disappeared and exclusively Fe2O3 was formed, in AISI 316 stainless steel some Cr2O3 persisted and Fe3O4 was mainly formed, which means that AISI 316 stainless steel is more resistant to oxidation after the breakdown.

引用

页数：10

共 50 条

[1] OXIDATION OF STAINLESS-STEELS (AISI-304 AND AISI-316) AT HIGH-TEMPERATURE - INFLUENCE ON THE METALLIC SUBSTRATUM
GUILLAMET, R
LOPITAUX, J
HANNOYER, B
LENGLET, M
JOURNAL DE PHYSIQUE IV, 1993, 3 (C9): : 349 - 356
[2] High temperature oxidation behavior of AISI 304 and AISI 430 stainless steels
Departamento de Química, Universidade Federal de Ouro Preto, Campus Universitário, 35400 Ouro Preto - MG, Brazil
不详
不详
Mater. Res., 2006, 4 (393-397):
[3] Oxidation of AISI 304 and AISI 439 stainless steels
Huntz, A. M.
Reckmann, A.
Haut, C.
Severac, C.
Herbst, M.
Resende, F. C. T.
Sabioni, A. C. S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 447 (1-2): : 266 - 276
[4] Coloration of the AISI 304 and AISI 316L stainless steels for biomedical applications
Padilla Jimenez, Luis Fernando
Parada Gamboa, Nayla Julieth
Guerrero Bermudez, Jader Enrique
Viejo Abrante, Fernando
Coy Echeverria, Ana Emilse
REVISTA ITECKNE, 2013, 10 (02): : 229 - 241
[5] Pack Cementation Coatings for High-Temperature Oxidation Resistance of AISI 304 Stainless Steel
Morteza Zandrahimi
Javad Vatandoost
Hadi Ebrahimifar
Journal of Materials Engineering and Performance, 2012, 21 : 2074 - 2079
[6] Pack Cementation Coatings for High-Temperature Oxidation Resistance of AISI 304 Stainless Steel
Zandrahimi, Morteza
Vatandoost, Javad
Ebrahimifar, Hadi
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (10) : 2074 - 2079
[7] Solid particle erosion of AISI 304, 316 and 420 stainless steels
Laguna-Camacho, J. R.
Marquina-Chavez, A.
Mendez-Mendez, J. V.
Vite-Torres, M.
Gallardo-Hernandez, E. A.
WEAR, 2013, 301 (1-2) : 398 - 405
[8] A STUDY ON CREVICE CORROSION OF AISI 316L, AISI 304L AND AISI 444 STAINLESS STEELS
Bellezze, T.
Quaranta, A.
Roventi, G.
Fratesi, R.
METALLURGIA ITALIANA, 2008, (01): : 7 - 11
[9] Influence of Sensitization on Mechanical Properties of AISI 304 Stainless Steel under High-Temperature
Jung, Kwang-Hu
Kim, Seong-Jong
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2019, 19 (07) : 4265 - 4269
[10] Comparative study of pulsed Nd:YAG laser welding of AISI 304 and AISI 316 stainless steels
Kumar, Nikhil
Mukherjee, Manidipto
Bandyopadhyay, Asish
OPTICS AND LASER TECHNOLOGY, 2017, 88 : 24 - 39

← 1 2 3 4 5 →