CURRENT DISTRIBUTIONS FOR BARBED PLATE-TO-PLANE CORONAS

被引：20

作者：

MCKINNEY, PJ ^{[1
]}

DAVIDSON, JH ^{[1
]}

LEONE, DM ^{[1
]}

机构：

[1] PENN STATE UNIV,DEPT MECH ENGN,UNIV PK,PA 16802

来源：

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | 1992年 / 28卷 / 06期

关键词：

D O I：

10.1109/28.175297

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Corona current distributions at the ground plane of barbed plate-to-plane negative discharge configurations are measured using an X-Y traversing ground plane containing an electrically isolated probe area. The effects of barb length, barb point radius of curvature, barb pattern, applied voltage, and plate-to-plane spacing on the current distribution are examined. The current distributions are visualized with oxidation patterns on a copper ground plane. Barb tip-to-plane spacing and applied voltage control maximum current density, whereas barb length, barb spacing, and pattern govern current density uniformity. A hexagonal barb pattern is suggested for use in electrostatic precipitators.

引用

页码：1424 / 1431

页数：8

共 22 条

[1]

Boulloud A., 1980, Sixth International Conference on Gas Discharges and their Applications, P110

[2]

CHATTOCK AP, 1899, PHIL MAG J SCI, V48, P4001

[3] POINT-SOURCE CORONA CURRENT DISTRIBUTION IN AN EXTERNAL-FIELD [J].