IMPROVED HIGH-TEMPERATURE OXIDATION BEHAVIOR OF AISI-347 GRADE STAINLESS-STEEL BY SUPERFICIAL COATING OF CEO2

被引：5

作者：

ROY, SK ^{[1
]}

BOTTINO, C ^{[1
]}

RAKESH, VR ^{[1
]}

KUIRY, SC ^{[1
]}

BOSE, SK ^{[1
]}

机构：

[1] CNR,ICFAM,I-16149 GENOA,ITALY

来源：

ISIJ INTERNATIONAL | 1995年 / 35卷 / 04期

关键词：

AISI 347 GRADE S S; HIGH TEMPERATURE; OXIDATION; NONISOTHERMAL; ISOTHERMAL; CEO2; COATING;

D O I：

10.2355/isijinternational.35.433

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Influence of superficially applied CeO2 coating on the high temperature oxidation behaviour of AISI 347 grade stainless steel under different rates of heating followed by isothermal holding at 1 273 K in dry air is reported. The reactive oxide coating not only reduced the oxidation rate but also facilitated improved oxide scale adherence to the alloy substrate. The coated steel could withstand a number of thermal cyclings without scale rupture and exhibited further reduction in rate in sequential exposures. Reduced reaction rate has been attributed mainly to a change over in the rate controlling process from outward migration of cations to the ingress of oxidant species. Improved scale adhesion is due to change in chemical composition and grain size of the resultant oxide scale promoted by the formation of silicon-oxide stringers into the base alloy favouring pegging mechanism. Scale growth mechanism has been substantiated by post oxidation analyses using SEM, EDS, EPMA and XRD which could illustrate the role of reactive oxide coating and the formation of various complex oxide phases along with NiNb2O6.

引用

页码：433 / 442

页数：10

共 27 条

[1] OXIDATION BEHAVIOR OF 20-PERCENT CR 25-PERCENT NI-NB STABILIZED STAINLESS-STEEL IN CO2 ENVIRONMENTS [J].