ANALYSIS OF DELAMINATION IN DRILLING OF BASALT FIBER REINFORCED POLYMER COMPOSITES

被引：0
|
作者：
Amuthakkannan, P. [1 ]
Manikandan, V. [1 ]
Uthayakumar, M. [1 ]
机构：
[1] Kalasalingam Univ, Dept Mech Engn, Krishnankoil 626126, India
来源：
MATERIALS PHYSICS AND MECHANICS | 2015年 / 24卷 / 01期
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fiber reinforced polymer composites are used in many engineering applications because of their low strength to weight ratio. Delamination is one of the major problems in manufacturing of the polymer composites. In this work, the delamination of acid treated basalt fiber reinforced composites was studied through drilling operation. Basalt fiber reinforced composites is prepared by using hand layup techniques with unsaturated polyester. Taguchi design of experiment was used to investigate the effects of drilling parameters such as spindle speed [2500, 2750, 3000 rpm], feed rate (0.2, 0.4, 0.6 mm/rev) and point angle (90(omicron), 118(omicron), 135(omicron)). A series of experiments based on L-9 orthogonal arrays are conducted using CNC machine and resulting delamination factor was determined. It was observed that speed and point angles are highly influencing parameters than feed rate for the delamination of the basalt fiber reinforced polymer composites.
引用
收藏
页码：1 / 8
页数：8
相关论文
共 50 条
  • [1] Numerical Investigation of Delamination in Drilling of Carbon Fiber Reinforced Polymer Composites
    Wenliang Tang
    Yan Chen
    Haojun Yang
    Hua Wang
    Qiwei Yao
    Applied Composite Materials, 2018, 25 : 1419 - 1439
  • [2] Numerical Investigation of Delamination in Drilling of Carbon Fiber Reinforced Polymer Composites
    Tang, Wenliang
    Chen, Yan
    Yang, Haojun
    Wang, Hua
    Yao, Qiwei
    APPLIED COMPOSITE MATERIALS, 2018, 25 (06) : 1419 - 1439
  • [3] Analysis of delamination in drilling glass fiber reinforced polyester composites
    Rajamurugan, T. V.
    Shanmugam, K.
    Palanikumar, K.
    MATERIALS & DESIGN, 2013, 45 : 80 - 87
  • [4] Basalt fiber reinforced hybrid polymer composites
    Czigány, T
    MATERIALS SCIENCE, TESTING AND INFORMATICS II, 2005, 473-474 : 59 - 66
  • [5] Assessment of induced delamination drilling of natural fiber reinforced composites: a statistical analysis
    Benyettou, Riyadh
    Amroune, Salah
    Slamani, Mohamed
    Seki, Yasemin
    Dufresne, Alain
    Jawaid, Mohammad
    Alamery, Salman
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 131 - 152
  • [6] Delamination assessment in drilling basalt/carbon fiber reinforced epoxy composite material
    Murthy, B. R. N.
    Beedu, Rajendra
    Bhat, Ritesh
    Naik, Nithesh
    Prabakar, Pranith
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 7427 - 7433
  • [7] A short review on basalt fiber reinforced polymer composites
    Dhand, Vivek
    Mittal, Garima
    Rhee, Kyong Yop
    Park, Soo-Jin
    Hui, David
    COMPOSITES PART B-ENGINEERING, 2015, 73 : 166 - 180
  • [8] Finite element analysis of drilling in carbon fiber reinforced polymer composites
    Phadnis, V. A.
    Roy, A.
    Silberschmidt, V. V.
    MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS 2012 (MPSVA 2012), 2012, 382
  • [9] Drilling induced delamination assessment of nanoparticles reinforced polymer matrix composites
    Pramod, R.
    Basavarajappa, S.
    Veeresh Kumar, G. B.
    Chavali, Murthy
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (06) : 2931 - 2948
  • [10] A Review on Drilling of Fiber-Reinforced Polymer Composites
    A. Mohan Kumar
    R. Parameshwaran
    R. Rajasekar
    C. Moganapriya
    R. Manivannan
    Mechanics of Composite Materials, 2022, 58 : 97 - 112
12345