THE EFFECT OF WET UNDERWATER WELDING ON COLD CRACKING SUSCEPTIBILITY OF DUPLEX STAINLESS STEEL

被引：31
|
作者：
Labanowski, J. [1 ]
Prokop-Strzelczynska, K. [1 ]
Rogalski, G. [1 ]
Fydrych, D. [1 ]
机构：
[1] Gdansk Univ Technol, Dept Mat & Welding Engn, Fac Mech Engn, 11-12 Narutowicza St, PL-80233 Gdansk, Poland
来源：
ADVANCES IN MATERIALS SCIENCE | 2016年 / 16卷 / 02期
关键词：
duplex stainless steel; underwater welding; cold cracking;
D O I：
10.1515/adms-2016-0010
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present work was conducted to assess the weldability of duplex stainless steel in underwater conditions. Metal manual arc welding (MMA) with the use of coated electrodes was used in the investigations. Tekken weldability tests were performed underwater at 0.5 m depth and in the air. Nondestructive tests, metallographic examinations of welds, ferrite content assessment in microstructure and hardness test were performed. The good weldability at underwater conditions of duplex stainless with the use of MMA method was confirmed, however difficulties in stable arc burning were revealed.
引用
收藏
页码：68 / 77
页数：10
相关论文
共 50 条
  • [1] Underwater Welding of Duplex Stainless Steel
    Labanowski, Jerzy
    Fydrych, Dariusz
    Rogalski, Grzegorz
    Samson, Krzysztof
    ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES, 2012, 183 : 101 - 106
  • [2] Microstructure and Failure Behavior of Duplex Stainless Steel Welds by Underwater Wet Laser Welding
    You, Jiayu
    Hu, Chenyu
    Zhang, Zhenhai
    Wang, Xiaoqiang
    Li, Yongqing
    Cai, Zhihai
    Li, Zhuying
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (08) : 2314 - 2320
  • [3] Underwater wet laser welding of duplex stainless steel under various water depths
    You, Jiayu
    Li, Zhuying
    Zhu, Jialei
    Qin, Hang
    Li, Yongqing
    Cai, Zhihai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 891
  • [4] Research on porosity of underwater wet FCAW duplex stainless steel
    石永华
    胡玉
    李志辉
    林水强
    沈晓勤
    易耀勇
    易江龙
    China Welding, 2016, 25 (02) : 27 - 33
  • [5] INVESTIGATION INTO COLD CRACKING IN UNDERWATER WET WELDING OF API 5L X70 STEEL
    Garasic, Ivica
    Kralj, Slobodan
    Kozuh, Zoran
    TRANSACTIONS OF FAMENA, 2009, 33 (03) : 25 - 34
  • [6] Synergistic effect of cold work and hydrogen charging on the pitting susceptibility of 2205 duplex stainless steel
    Yin, Liqiang
    Liu, Yuanyuan
    Qian, Shengsheng
    Jiang, Yiming
    Li, Jin
    ELECTROCHIMICA ACTA, 2019, 328
  • [7] Towards understanding the effect of deformation mode on stress corrosion cracking susceptibility of grade 2205 duplex stainless steel
    Ornek, C.
    Engelberg, D. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 666 : 269 - 279
  • [8] COLD CRACKING OF UNDERWATER WET WELDED S355G10+N HIGH STRENGTH STEEL
    Fydrych, D.
    Labanowski, J.
    Tomkow, J.
    Rogalski, G.
    ADVANCES IN MATERIALS SCIENCE, 2015, 15 (03): : 48 - 56
  • [9] Evaluation of the sigma phase precipitation susceptibility in duplex stainless steel SAF2205 welding
    Fonseca, Camila Soares
    da Silva, Sidney Nicodemos
    Gomes, Henrique Giacomini
    Silva, Danillo Wisky
    Guimaraes Junior, Jose Benedito
    Pinheiro, Ivete Peixoto
    MATERIA-RIO DE JANEIRO, 2019, 24 (03):
  • [10] Effect of mode of metal transfer on corrosion properties of duplex stainless steel welding
    Gohil, Chintan Bahadursinh
    Soman, Sanjay Narhar
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ENGINEERING, 2025, 20 (01):
12345