A COMPARATIVE STUDY OF FACE MILLING OF D2 STEEL USING AL(2)O(3) BASED NANOFLUID MINIMUM QUANTITY LUBRICATION AND MINIMUM QUANTITY LUBRICATION

被引：7

作者：

Ul Haq, Muhammad Ahsan ^{[1
]}

Khan, Aqib Mashood ^{[2
]}

Gong, Le ^{[2
]}

Xu, Tao ^{[2
]}

Meng, Longhui ^{[3
]}

Hussain, Salman ^{[1
]}

机构：

[1] Univ Engn & Technol, Ind Engn Dept, Taxila 47050, Pakistan

[2] NUAA, Dept Mech Manufacture & Automat, Nanjing, Jiangsu, Peoples R China

[3] Nanjing Tech Univ, Sch Mech & Power Engn, Nanjing 211816, Jiangsu, Peoples R China

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2018年 / 12卷 / 01期

关键词：

face milling; temperature; response surface methodology; steel;

D O I：

10.12913/22998624/85629

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aims to investigate the effects of process parameters: feed, depth of cut and flow rate, on the temperature during face milling of the D2 tool steel under two different lubricant conditions, Minimum Quantity Lubrication (MQL) and Nano fluid Minimum Quantity Lubrication (NFMQL). Deionized water with the flow rate range 200-400 ml/h was used in MQL. 2% by weight concentration of Al2O3 nano particles with deionized water as a base fluid used as NFMQL with the same flow rate. Response surface methodology RSM central composite design CCD was used to design experiment run, modeling and analysis. ANOVA was used for the adequacy and validation of the system. The comparison shows that NFMQL condition reduced temperature more efficiently during machining.

引用

页码：99 / 105

页数：7

共 13 条

[1] Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process [J].

Amrita, M. ;

Srikant, R. R. ;

Sitaramaraju, A. V. .

MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (05) :600-605

[2] Temperature dependence of thermal conductivity enhancement for nanofluids [J].

Das, SK ;

Putra, N ;

Thiesen, P ;

Roetzel, W .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2003, 125 (04) :567-574

[3] A critical review of convective heat transfer of nanofluids [J].

Daungthongsuk, Weerapun ;

Wongwises, Somchai .

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2007, 11 (05) :797-817

[4]

Hadi M, 2015, INDIAN J SCI TECHN S, V8, P130

[5] Dry cutting [J].

Klocke, F ;

Eisenblatter, G .

CIRP ANNALS 1997 - MANUFACTURING TECHNOLOGY, VOLUME 46/2/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1997, :519-526

[6] Performance profiling of minimum quantity lubrication in machining [J].

Li, Kuan-Ming ;

Liang, Steven Y. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 35 (3-4) :226-233

[7] The tribological properties of nanofluid used in minimum quantity lubrication grinding [J].

Mao, Cong ;

Huang, Yong ;

Zhou, Xin ;

Gan, Hangyu ;

Zhang, Jian ;

Zhou, Zhixiong .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 71 (5-8) :1221-1228

[8] Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide(MoS2) nanolubrication in end milling machining [J].

Rahmati, Bizhan ;

Sarhan, Ahmed A. D. ;

Sayuti, M. .

JOURNAL OF CLEANER PRODUCTION, 2014, 66 :685-691

[9]

Sarfraz S., 2016, INT J ADV MANUF TECH, P1

[10] Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system [J].

Sarhan, Ahmed A. D. ;

Sayuti, M. ;

Hamdi, M. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (5-8) :505-512

← 1 2 →