STRESS INTENSITY FACTORS IN ANISOTROPIC SANDWICH PLATE WITH A PART-THROUGH CRACK UNDER MIXED-MODE DEFORMATION

被引：10
|
作者：
HONG, CS
JEONG, KY
机构：
[1] Korea Advanced Inst of Science &, Technology, Dep of Mechanical, Engineering, Seoul, South Korea, Korea Advanced Inst of Science & Technology, Dep of Mechanical Engineering, Seoul, South Korea
来源：
ENGINEERING FRACTURE MECHANICS | 1985年 / 21卷 / 02期
关键词：
PLATES - Stresses - STRUCTURAL DESIGN - Loads;
D O I：
10.1016/0013-7944(85)90017-7
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
An adhesively bonded anisotropic plate containing a part-through crack under mixed mode deformation is investigated. The problem is reduced to a pair of Fredholm integral equations of the second kind by mathematical analysis. By solving these equations numerically shear stresses of the adhesive and stress intensity factors in the cracked plate are obtained. Numerical results are presented for tension loading and shear loading, respectively, for various fiber orientations of the laminated composite. The results indicate a fairly strong dependence of the stress intensity factor on the fiber orientation of plate.
引用
收藏
页码：285 / 292
页数：8
相关论文
共 50 条
  • [1] ORTHOTROPIC SANDWICH PLATE CONTAINING A PART-THROUGH CRACK UNDER MIXED MODE DEFORMATION
    KO, WL
    ENGINEERING FRACTURE MECHANICS, 1978, 10 (01) : 15 - 23
  • [2] STRESS INTENSITY FACTORS IN FINITE ORTHOTROPIC PLATES WITH A CRACK UNDER MIXED-MODE DEFORMATION
    YUM, YJ
    HONG, CS
    INTERNATIONAL JOURNAL OF FRACTURE, 1991, 47 (01) : 53 - 67
  • [3] Mixed-mode stress intensity factors for a crack in an anisotropic bi-material strip
    Liu, L
    Kardomateas, GA
    Holmes, JW
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2004, 41 (11-12) : 3095 - 3107
  • [4] Boundary element analysis of mixed-mode stress intensity factors in an anisotropic cuboid with an inclined surface crack
    Chen, Chia-Hau
    Chen, Chao-Shi
    Pan, Ernian
    Tseng, Han-Chou
    Yu, Pao-Shan
    ENGINEERING COMPUTATIONS, 2009, 26 (7-8) : 1056 - 1073
  • [5] Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading
    Yarullin, R. R.
    Shlyannikov, V. N.
    Ishtyriakov, I. S.
    Yakovlev, M. M.
    FRATTURA ED INTEGRITA STRUTTURALE, 2020, Gruppo Italiano Frattura (53): : 210 - 222
  • [6] Stress intensity factors for a mixed mode center crack in an anisotropic strip
    Huang, HY
    Kardomateas, GA
    INTERNATIONAL JOURNAL OF FRACTURE, 2001, 108 (04) : 367 - 381
  • [7] Stress intensity factors for a mixed mode center crack in an anisotropic strip
    Haiying Huang
    George A. Kardomateas
    International Journal of Fracture, 2001, 108 : 367 - 381
  • [8] Determination of mixed-mode stress intensity factors, fracture toughness, and crack turning angle for anisotropic foam material
    Arakere, Nagaraj K.
    Knudsen, Erik C.
    Wells, Doug
    McGill, Preston
    Swanson, Gregory R.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2008, 45 (18-19) : 4936 - 4951
  • [9] Measurement of stress intensity factors of a mixed-mode interface crack by a speckle photography
    Machida, K
    OPTICAL REVIEW, 1997, 4 (02) : 253 - 260
  • [10] Measurement of Stress Intensity Factors of a Mixed-Mode Interface Crack by a Speckle Photography
    Kenji Machida
    Optical Review, 1997, 4 : 253 - 260
12345