THE MEASUREMENT OF THE HEAT-TRANSFER COEFFICIENT BETWEEN HIGH-TEMPERATURE LIQUIDS AND SOLID-SURFACES

Two experimental techniques were developed for the purpose of measuring the heat-transfer coefficient between liquid slags/salts and solid surfaces. This was carried out because the heat-transfer coefficient is important for the design and operation of metallurgical reactors. A ''cold-finger'' technique was developed for the purpose of carrying out heat-transfer measurements during steady-state conditions simulating heat fluxes through furnace sidewalls. A lump capacitance method was developed and tested for the purpose of simulating transient conditions. To determine the effect of fluid flow on the heat-transfer coefficient, nitrogen gas stirring was used. The two techniques were tested in molten (1) and NaNO3, (2) NaCl, (3) Na3AlF6, and (4) 2FeO . SiO2, giving consistent results. It was found that the heat-transfer coefficient increases with increasing bath superheat and stirring.