DIVERTOR PERFORMANCE ON CARBON AND BERYLLIUM TARGETS IN JET

The dependence of impurity production and retention on the divertor density, on the power flow into this region as well as on the X-point to target distance are investigated. Model predictions suggest a good impurity retention above a certain divertor (scrape-off) density threshold, which is dependent on heating power. In our experiments pre-programmed midplane or X-point gas puffs were used to scan the density, as well as to avoid the depletion of particles from the divertor and the scrape-off during H-modes. The gas puffs reduce T(e) and increase N(e) in particular at the outer strike zone. In general the Be as well as the C influx increases with density, which is understood from the T(e)(T(i)) dependence of the sputtering yields. The impurity retention shows the expected improvement with increasing scrape-off (divertor) density as well as with increasing X-point to target distance (connection length).