Hot Corrosion Behavior of High-Chromium, High-Carbon Cast Irons in NaCl-KCl Molten Salts

被引：8

作者：

Vuelvas-Rayo, S. ^{[1
]}

Gonzalez-Rodriguez, J. G. ^{[1
]}

Porcayo-Calderon, J. ^{[2
]}

Salinas-Bravo, V. M. ^{[2
]}

Maldonado-Ruiz, S. I. ^{[3
]}

机构：

[1] Univ Autonoma Estado Morelos, CIICAp, Ave Univ 1001,Col Chamilpa, Cuernavaca 62500, Morelos, Mexico

[2] IIE, Gerencia Mat & Proc Quimicos, Cuernavaca 62490, Morelos, Mexico

[3] Univ Autonoma Zacatecas, Fac Ingn, Zacatecas 98068, ZAC, Mexico

来源：

INTERNATIONAL JOURNAL OF CORROSION | 2012年 / 2012卷

关键词：

D O I：

10.1155/2012/479761

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

A study on the corrosion behavior of a series of experimental high-chromium (18.53-30.48 wt.%), high-carbon (3.82-5.17%) cast irons in NaCl-KCl (1 : 1M) at 670 degrees C has been evaluated by using weight loss technique and compared with a 304-type stainless steel. It was found that all castings had a higher corrosion rate than conventional 304SS and that the addition of Cr increased the degradation rate of the cast irons. Additionally, corrosion rate increased by increasing the C contents up to 4.29%, but it decreased with a further increase in its contents. Results are discussed in terms of consumption of the Cr2O3 layer by the melt.

引用

页数：9

共 50 条

[41] Specific Features of the Fracture of High-Chromium Cast Irons Under Abrasive Wear [J].

Netrebko, V. V. ;

Volchok, I. P. ;

Popov, S. M. ;

Akimov, I., V .

MATERIALS SCIENCE, 2022, 57 (04) :439-445

[42] Materials Selection Chart of High-Chromium Cast Irons Materials and Microelectronic Components [J].

Microstruct Sci, 23 (131)

[43] Specific Features of the Fracture of High-Chromium Cast Irons Under Abrasive Wear [J].

V. V. Netrebko ;

I. P. Volchok ;

S. M. Popov ;

I. V. Akimov .

Materials Science, 2022, 57 :439-445

[44] Abrasive and corrosive resistance of high-chromium cast irons under centrifugal casting [J].

Shadrov, N.Sh. ;

Plotnikov, G.N. .

Liteinoe Proizvodstvo, 1994, (01) :12-13

[45] Factors Affecting the Austenite Measurements in High-Chromium White Cast Irons. [J].

Morton, P.A. ;

Gundlach, R.B. ;

Dodd, J. .

Giessereipraxis, 1986, (23-24) :301-307

[46] Abrasion Wear Behavior of High-chromium Cast Iron [J].

Pokusova, M. ;

Brusilova, A. ;

Soos, L'. ;

Berta, I. .

ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (02) :69-74

[47] Corrosion behaviors of pre-oxidized Al-containing Fe alloys in molten NaCl-KCl salts [J].

Park, Taehoon ;

Lee, Wonseok ;

Kim, Sumin ;

Eom, Hyun Joon ;

Yang, Wonseok ;

Foster, Richard I. ;

Kim, Chaewon ;

Choi, Sungyeol ;

Jang, Changheui .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 36 :5237-5246

[48] JET SLURRY CORROSIVE WEAR OF HIGH-CHROMIUM CAST-IRON AND HIGH-CARBON STEEL GRINDING BALL ALLOYS [J].

PITT, CH ;

CHANG, YM .

CORROSION, 1986, 42 (06) :312-317

[49] Three-body tribocorrosion of high-chromium cast irons in neutral and alkaline environments [J].

Salasi, M. ;

Stachowiak, G. B. ;

Stachowiak, G. W. .

WEAR, 2011, 271 (9-10) :1385-1396

[50] Early-stage corrosion of IN 740H alloy in eutectic NaCl-KCl molten salt at high temperatures [J].

Gore, Poorwa ;

Singh, Mahander Pratap ;

Suryateja, D. ;

Basu, Bikramjit ;

Chattopadhyay, Kamanio .

SOLAR ENERGY, 2023, 252 :330-341

← 1 2 3 4 5 →