Numerical analysis of double pipe heat exchanger using heat transfer augmentation techniques

被引：13

作者：

Mohanty, Rajiva Lochan ^{[1
]}

Bashyam, Sharon ^{[2
]}

Das, Darpahari ^{[3
]}

机构：

[1] Natl Inst Technol Silchar, Mech Engn Dept, C Khirod Kumar Nayak Satyabihar, Rasulgarh 751010, India

[2] Mech Engn Dept Silchar, Vishakapatnam 530048, India

[3] Natl Inst Technol Silchar, Mech Engn Dept, Cachar 788010, Assam, India

来源：

INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY | 2014年 / 18卷 / 03期

关键词：

D O I：

10.1007/s12588-014-9093-9

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

In the present work, the performance of a Double Pipe Heat Exchanger [DPHE] has been evaluated by Computational Fluid Dynamics (CFD) package [FLUENT 14.0] and the results so obtained have been compared wherever possible. The entire analysis has been done by selecting an existing design of a double pipe heat exchanger with specified flow conditions at the inlet to the heat exchanger. Investigations have been carried out for different heat exchanger configurations by employing twisted tape insert with different twist ratios, regularly spaced twisted tape, and twist in themiddle as well as with protrusion in the outer. Effects of all these inserts on the performance of the heat exchanger have been analyzed in detail. The improved performance with each of the configurations has been reported graphically as well as in the tabular form and the optimum performance has also been indicated. However it has been observed that the enhancement in heat transfer rate is at the expense of pressure drop which has also been evaluated in terms of friction factor.

引用

页码：337 / 348

页数：12

共 21 条

[1]

Adrain B., HEAT TRANSFER HDB, P1033

[2] Enhancement and Prediction of Heat Transfer Rate in Turbulent Flow Through Tube With Perforated Twisted Tape Inserts: A New Correlation [J].

Ahamed, J. U. ;

Wazed, M. A. ;

Ahmed, S. ;

Nukman, Y. ;

Ya, T. M. Y. S. Tuan ;

Sarkar, M. A. R. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2011, 133 (04)

[3] Pressure drop and heat transfer comparison for both microfin tube and twisted-tape inserts in laminar flow [J].

Al-Fahed, S ;

Chamra, LM ;

Chakroun, W .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1998, 18 (04) :323-333

[4]

[Anonymous], 2006, 2 JOINT INT C SUST E

[5] Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics [J].

Eiamsa-ard, S. ;

Nivesrangsan, P. ;

Chokphoemphun, S. ;

Promvonge, P. .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (07) :850-856

[6] Heat transfer enhancement in a tube using delta-winglet twisted tape inserts [J].

Eiamsa-ard, S. ;

Wongcharee, K. ;

Eiamsa-ard, P. ;

Thianpong, C. .

APPLIED THERMAL ENGINEERING, 2010, 30 (04) :310-318

[7]

Eiamsa-ard Smith, 2006, INT COMMUNICATIONS H, V33

[8] Augmentation of convective heat transfer inside tubes with three-dimensional internal extended surfaces and twisted-tape inserts [J].

Liao, Q ;

Xin, MD .

CHEMICAL ENGINEERING JOURNAL, 2000, 78 (2-3) :95-105

[9]

Lin Zhi-Min, 2009, T ASME J HEAT TRANSF, V131

[10]

Lokanath MS, 2002, P 5 ISHMT ASME HEAT, P863

← 1 2 3 →