AN INVESTIGATION OF A HEAT-PIPE COOLING SYSTEM FOR USE TURNING ON A LATHE

被引：26

作者：

JUDD, RL

MACKENZIE, HS

ELBESTAWI, MA

机构：

[1] Department of Mechanical Engineering, McMaster University, Hamilton, Ontario

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 1995年 / 10卷 / 06期

关键词：

HEAT GENERATION; HEAT PIPES; HEAT REMOVAL; METAL TURNING; THERMAL INACCURACY;

D O I：

10.1007/BF01179398

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

A novel proposal is presented in this paper for reducing the thermal inaccuracy of turning on a lathe by removing the portion of the heat generated during the cutting process which is transferred to the carbide cutting insert by installing a heat pipe in the toolholder. The ability of the heat pipe to affect the temperature of the carbide cutting insert and the elongation of the toolholder is inferred from the response of thermocouples and strain gauges mounted on the toolholder to the heat generated during various cutting conditions. The results of the experimental investigation have proved the feasibility of the concept and recommendations have been made for continuing the research and improving the performance of the system.

引用

页码：357 / 366

页数：10