Removal of an insecticide (methomyl) from aqueous solutions using natural clay

Adsorption of an insecticide (methomyl) onto natural clay have been investigated as a possible alternative method for its removal from aqueous solutions. The study was aimed to use low cost material as a step towards cleaner environment. The influence of system variables, such as particle size (dp) and temperature on the adsorption capacity have been studied. It was found that natural clay reached equilibrium with methomyl solution in time less than 3 h. The experimental data were fitted to equilibrium isotherm models, Langmuir, Freundlich and Redlich-Peterson. A dimensionless separation factor, b R, was used to judge the favorable adsorption. The results indicated that percentage of insecticide removal ranged from 27.6 to 32.9 for initial concentration varied from 43.71 to 19.99 mg/l. The effect of temperature showed the exothermic nature of the process. The enthalpy change (Delta H) of adsorption has been evaluated and it has a value of, -17.54 kJ/mol. The Langmuir model fit the experimental data significantly better than Freundlich and Redlich-Peterson models. A chart based on material balance using single batch adsorber was constructed for different percentage of methomyl removal using the Langmuir isotherm where the mass of natural clay required to treat a specified volume of solution is calculated.(C) 2012 Faculty of Engineering, Alexandria University. Production and hosting by Elsevier B. V. All rights reserved.