Experimental study of seepage characteristics of soil-rock mixture with different rock contents in fault zone

被引:0
|
作者
Wang Peng-fei [1 ]
Li Chang-hong [1 ]
Ma Xue-wen [2 ]
Li Zi-jian [2 ]
Liu Jing-jun [2 ]
Wu Yang-fan [2 ]
机构
[1] Univ Sci & Technol Beijing, Key Lab, Minist Educ Efficient Min & Safety Met Mine, Beijing 100083, Peoples R China
[2] Univ Sci & Technol Beijing, Sch Civil & Resources Engn, Beijing 100083, Peoples R China
基金
中国国家自然科学基金; 国家重点研发计划;
关键词
fault zone; rock-bearing rate; soil-rock mixture(SRM); confining pressure loading and unloading; seepage characteristics;
D O I
10.16285/j.rsm.2018.1240
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
The mixture of fault gouge and rubble which taken out from fault zone is used to make the soil-rock mixture(SRM) sample with rock block proportions of 20%, 30%, 40%, 50%, 60% and 70% respectively, and using GDS triaxial test system to measure the seepage characteristics of SRM sample under the different loading and unloading confining pressures, to research the variation law of permeability coefficient of the SRM(soil-rock mixture) sample with different rock block proportions under different confining pressure levels. The test results show that: (1) The permeability coefficient of the SRM sample with different rock block proportions decreases as the pressure increases; and the decrease rate of permeability coefficient in the initial stage of confining pressure loading is obviously higher than in the semi-late period. (2) In the stage of confming pressure loading and unloading, the permeability coefficient of SRM sample at different confining pressure levels present a common trend that with the increase of rock block proportion; it decrease first then increase, the permeability coefficient of the sample with rock block proportion 40% is the smallest; 70% is the largest. (3) In the stage of confining pressure unloading; the recovery degree of permeability coefficient of SRM sample is ascend with the increase of rock block proportion, and the recovery rate of SRM sample with rock block proportion 70% reached 50.2%. (4) In the stage of confming pressure loading and unloading; the sensitivity of the permeability coefficient of SRM sample to the rock block proportion showed a rule of decrease first, then increase and then decrease; and when rock block proportion reached 60%, the sensitivity is highest. (5) In the stage of confming pressure loading and unloading, the relationship between permeability coefficient and confming pressure can described by exponential function.
引用
收藏
页码:53 / 61
页数:9
相关论文
共 20 条
  • [1] [陈忠辉 Chen Zhonghui], 2011, [中国矿业大学学报. 自然科学版, Journal of China University of Mining & Technology], V40, P673
  • [2] Feng SX, 2018, ROCK SOIL MECH, V39, P2886, DOI 10.16285/j.rsm.2016.2545
  • [3] [顾金略 GU Jinlue], 2009, [工程地质学报, Journal of Engineering Geology], V17, P711
  • [4] [黄志全 Huang Zhiquan], 2017, [工程地质学报, Journal of Engineering Geology], V25, P50
  • [5] [李海燕 Li Haiyan], 2017, [采矿与安全工程学报, Journal of Mining & Safety Engineering], V34, P323
  • [6] Li L., 2011, CHIN J ROCK MECH ENG, V30
  • [7] LIU Jie, 1992, SEEPAGE STABILITY CO
  • [8] [吕古贤 LU Guxian], 2007, [大地构造与成矿学, Geotectonica et Metallogenia], V31, P193
  • [9] Shen H, 2017, ROCK SOIL MECH, V38, P1497, DOI 10.16285/j.rsm.2017.05.033
  • [10] [孙华飞 Sun Huafei], 2014, [中国科学. 技术科学, Scientia Sinica Technologica], V44, P172