Measurement of surface tension of molten matte phases by an improved sessile drop method

被引：1

作者：

Hamuyuni, J. ^{[1
,2
]}

Taskinen, P. ^{[1
]}

Akdogan, G. ^{[2
]}

Bradshaw, S. M. ^{[2
]}

机构：

[1] Aalto Univ, Met Thermodynam & Modelling Res Grp, Sch Sci & Technol, Aalto, Finland

[2] Univ Stellenbosch, Dept Proc Engn, Stellenbosch, South Africa

来源：

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY | 2012年 / 121卷 / 03期

关键词：

Surface tension; Sessile drop; Molten phases; Sulphides; Ni3S2; Cu2S; FeS;

D O I：

10.1179/1743285512Y.0000000013

中图分类号：

TD [矿业工程];

学科分类号：

0819 ;

摘要：

Surface tensions of Ni3S2, Cu2S and FeS molten phases were measured using an improved sessile drop method in an inert atmosphere of purified argon. The traditional sessile drop method was modified before measurements were obtained. The surface tension values were obtained over a wide range of temperature from their respective melting temperatures to 1300 degrees C. In the temperature range 1000-1300 degrees C, surface tension of molten Ni3S2 decreased linearly with increasing temperature. However, the surface tensions of molten FeS and Cu2S phases were approximately constant over this range of temperature.

引用

页码：173 / 177

页数：5

共 18 条

[1] AN AUTOMATED APPARATUS FOR INTERFACIAL-TENSION MEASUREMENTS BY THE SESSILE DROP TECHNIQUE
CARLA, M
CECCHINI, R
BORDI, S
[J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 1991, 62 (04) : 1088 - 1092
[2] Chakrabarti D. J., 1983, BINARY ALLOY PHASE D, V2, P1467
[3] On the measurement of surface tension for liquid FeSiB glass-forming alloys by sessile drop method
Chiriac, H
Tomut, M
Naum, C
Necula, F
Nagacevschi, V
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 226 : 341 - 343
[4] Dorsey N. E., 1928, WASHINGTON ACAD SCI, V18, P505
[5] Drelich J., 2002, ENCYCLOP SURF COLLOI, V3, P3158, DOI DOI 10.1081/E-ESCS-120000636
[6] Measurement of contact angle and work of adhesion at high temperature
Eustathopoulos, N
Sobczak, N
Passerone, A
Nogi, K
[J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (9-10) : 2271 - 2280
[7] Eustathopoulos N., 1999, PERG MAT SER, V3
[8] SURFACE AND INTERFACIAL-TENSION OF THE NI-FE-S, NI-CU-S, AND FAYALITE SLAG SYSTEMS
IP, SW
TOGURI, JM
[J]. METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1993, 24 (04): : 657 - 668
[9] Kozakevich F., 1959, PHYSICOCHEMICAL MEAS, P208
[10] KUCHARSKI M, 1994, CAN METALL QUART, V33, P197

← 1 2 →