Honge oil methyl ester and producer gas-fuelled dual-fuel engine operated with varying compression ratios

被引:20
作者
Yaliwal, V. S. [1 ]
Nataraja, K. M. [1 ]
Banapurmath, N. R. [2 ]
Tewari, P. G. [3 ]
机构
[1] SDM Coll Engn & Technol, Dept Mech Engn, Dharwad 580002, Karnataka, India
[2] JSS Acad Tech Educ, Dept Mech Engn, Bangalore 560060, Karnataka, India
[3] BVB Coll Engn & Technol, Dept Mech Engn, Dharwad 580002, Karnataka, India
关键词
producer gas; gasifier-engine system; compression ratio; performance; combustion; emissions;
D O I
10.1080/19397038.2013.837108
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Alternative and renewable fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable, besides providing food and energy security and foreign exchange savings and addressing environmental and socio-economic issues. Therefore, these renewable fuels can be used predominantly in compression ignition (CI) engines for transportation purposes and power generation applications. Today, the use of biomass-derived producer gas is more relevant for addressing rural power generation and is also a promising technique for controlling both NOx and soot emission levels. Although a producer gas-biodiesel-operated dual-fuel diesel engine exhibits lower performance, they are independent from the use of fossil fuels. The lower performance of the engine could be due to the slow-burning and lower calorific value of producer gas. For this purpose, exhaustive experiments on the use of Honge oil methyl ester (HOME)-producer gas in a dual-fuel CI engine were carried out for the improvement of its fuel efficiency. This paper presents the effect of the compression ratio (CR) on the performance, combustion and exhaust emission characteristics of a single-cylinder, four-stroke, direct injection stationary diesel engine operated using HOME and producer gas in a dual-fuel mode. The results indicated that the HOME-producer gas combination exhibited lower brake thermal efficiency (BTE) with comparable emission levels with the diesel-producer gas combination at different CRs. Comparative measures of BTE, peak pressure, pressure-crank angle variation, heat release rate, smoke opacity, and hydrocarbon (HC), carbon monoxide (CO) and nitric oxide (NOx) emission levels are presented and analysed.
引用
收藏
页码:330 / 340
页数:11
相关论文
共 26 条