Photolithography on micromachined 3D surfaces using electrodeposited photoresists

被引：64
作者：
Kersten, P
Bouwstra, S
Petersen, JW
机构：
[1] The Technical Univ of Denmark, Lyngby, Denmark
来源：
SENSORS AND ACTUATORS A-PHYSICAL | 1995年 / 51卷 / 01期
关键词：
photolithography; electrodeposited photoresists; micromachining;
D O I：
10.1016/0924-4247(96)80052-5
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Photolithography on micromachined 3D surfaces is becoming a key process for the fabrication of a wide range of novel micromechanical devices. Due to the surface tension, photoresists deposited as a liquid cause problems at sharp corners, which occur commonly in micromachined silicon devices. This paper describes the application of an electrodepositable ultraviolet sensitive photoresist, which is commercially available and which is already used in printed circuit board production. Process considerations are discussed to apply this technology successfully to silicon substrates. The results show the feasibility of photolithography on surfaces with anisotropically etched 200 mu m deep cavities in (100) silicon.
引用
收藏
页码：51 / 54
页数：4
相关论文
共 5 条
  • [1] ATHOMPSON LF, 1983, INTRO MICROLITHOGRAP, P18
  • [2] KAWAHITO S, 1993, 7TH P INT C SOL STAT, P892
  • [3] Linder S., 1994, Proceedings IEEE Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems (Cat. No.94CH3404-1), P349, DOI 10.1109/MEMSYS.1994.556165
  • [4] Vidusek D. A., 1989, Circuit World, V15, P6, DOI 10.1108/eb043964
  • [5] [No title captured]
1