NATURAL FREQUENCIES OF RECTANGULAR STEPPED PLATES USING POLYNOMIAL BEAM FUNCTIONS WITH SUBSECTIONING

被引：13

作者：

LAM, KY

AMRUTHARAJ, G

机构：

[1] Department of Mechanical and Production Engineering, National University of Singapore, Singapore, 0511

来源：

APPLIED ACOUSTICS | 1995年 / 44卷 / 04期

关键词：

D O I：

10.1016/0003-682X(94)00030-Y

中图分类号：

O42 [声学];

学科分类号：

070206 ; 082403 ;

摘要：

Natural frequencies of thin rectangular plates with single or multiple step variations in thickness and different edge boundary conditions are obtained by employing a novel hybrid method involving a set of beam characteristic polynomials and subsectioning using the Rayleigh-Ritz method. The formulations of the present method involve the division of the plate into strips, the number of strips used depending on the geometric discontinuities. The assumed admissible deflection function of each strip maintains continuity at the interconnecting line of each strip. The natural frequencies obtained by this method are compared with previously published ones and very good agreement is achieved.

引用

页码：325 / 340

页数：16

共 11 条

[1]

Leissa, Vibration of plates, NASA SP-160, (1969)

[2]

Bhat, Natural frequencies of rectangular plates using characteristic orthogonal polynomials in Raleigh-Ritz method, J Sound and Vibr., 102, 4, pp. 493-499, (1985)

[3]

Dickinson, Di Blasio, On the use of orthogonal polynomials in the Rayleigh-Ritz method for the study of the flexural vibration and buckling of isotropic and orthotropic rectangular plates, J Sound and Vibr., 108, 1, pp. 51-62, (1986)

[4]

Lam, Liew, Chow, Free vibration analysis of isotropic and orthotropic triangular plates, Int. J. Mech. Sci., 32, 5, pp. 455-464, (1990)

[5]

Liew, Lam, A Rayleigh-Ritz approach to transverse vibration of isotropic and anistropic trapezoidal plates using orthogonal plate function, Int. J. Solids & Structures, 27, 2, pp. 189-203, (1991)

[6]

Chopra, Vibration of stepped thickness plates, Int. J. Mech. Sci., 16, pp. 337-344, (1974)

[7]

Laura, Sanzi, Bergman, Carnicer, Numerical experiments and vibrating rectangular plates with discontinuously varying cross-section, Journal of Sound and Vibration, 135, 1, pp. 161-165, (1989)

[8]

Laura, Romanelli, Vibrations of rectangular plates elastically restrained against rotation along all edges and subjected to a bi-axial state of stress, J. Sound and Vibr., 37, 3, pp. 367-377, (1974)

[9]

Lam, Hung, Orthogonal polynomials and sub-sectioning method for vibration plates, Computers & Structures, 34, 6, pp. 827-834, (1990)

[10]

Lam, Hung, Chow, Vibration analysis of plates with cutouts by the modified Rayleigh-Ritz method, Appl. Acoust., 28, pp. 49-60, (1989)

← 1 2 →