THE HARDNESS-FLOW STRESS CORRELATION IN METALLIC MATERIALS

Hardness is a measure of the resistance of a material to indentation and a wide variety of indentation tests have been devised to measure the hardness of materials. In the case of hardness tests which utilize spherical balls as the indentor, it is also possible to derive flow stress-strain relationships from hardness tests carried out either over a range of loads (static test) or over a range of impact velocities (dynamic test). This paper first describes the experimental procedure for obtaining stress-strain curves from hardness tests. In addition, the paper also analyzes in detail, the indentation test conditions under which the conversion of the hardness-average strain data to flow stress-strain data is simple and straightforward in the sense that the constraint factor which is the correlating parameter for the above conversion is not only independent of strain but also easily computable on the basis of known mechanical property data of the test material.