OPTIMIZATION OF MACHINING CONDITIONS WITH PRACTICAL CONSTRAINTS

被引：148
作者：
SHIN, YC
JOO, YS
机构：
[1] Department of Mechanical Engineering, Purdue University, West Lafayette, IN
[2] The Pennsylvania State University, University Park, PA
来源：
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1992年 / 30卷 / 12期
关键词：
D O I：
10.1080/00207549208948198
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a model for the optimization of machining conditions in a multi-pass turning operation. Both rough cutting and finishing cutting are considered in the model and dual optimization of cost functions for each subproblem is pursued. The preventive tool replacement strategy used in practice is incorporated. Machining idle time is also regarded as a variable. After practical constraints are established, optimization is carried out using the dynamic programming method. An example illustrates the formulation of the problem and the optimization procedure.
引用
收藏
页码：2907 / 2919
页数：13
相关论文
共 14 条
  • [1] Boothroyd G., Rusek P., Maximum rate of profit criteria in machining. ASME Transactions, Journal of Engineering for Industry, pp. 217-220, (1976)
  • [2] Crookall J.R., Venkataraman N., Computer optimization of multi-pass turning, International Journal of Production Research, 9, 2, pp. 247-259, (1971)
  • [3] Davis R.P., Wysk R.A., Agee M.H., Characteristics of machine parameter optimization models, Applied Mathematical Modelling, 2, pp. 275-279, (1978)
  • [4] Ermer D.S., Optimization of the constrained machining economics problem by geometric programming, ASME Transactions, Journal of Engineering for Industry, pp. 1067-1072, (1971)
  • [5] Ermer D.S., Kromodihardjo S., Optimization of multipass turning with constraints, Transactions ASME, Journal of Engineering for Industry, pp. 462-468, (1981)
  • [6] Giardini C., Buini A., Zavanella L., A probabilistic approach to the optimization of multi-pass turning, Transactions of NAMRI, 17, pp. 254-259, (1989)
  • [7] Gilbert W.W., Economics of machining, Machining Theory and Practice, American Society of Metals, pp. 465-485, (1950)
  • [8] Hati S.K., Rao S.S., Determination of optimum machining conditions-detenninistic and probabilistic approaches, Transactions ASME, Journal of Engineering for Industry, pp. 354-359, (1976)
  • [9] Iwata K., Et al., A probabilistic approach to the determination of the optimum cutting conditions. ASME Transactions, Journal of Engineeringfor Industry, 94, pp. 1099-1107, (1972)
  • [10] Kimbler D.L., Wvsk R.A., Davis R.P., Alternative approaches to the machining parameter optimization problem, Computers and Industrial Engineering, 2, pp. 195-201, (1978)
12