CONTACT STRESS-ANALYSIS OF SPIRAL BEVEL GEARS USING FINITE-ELEMENT ANALYSIS

被引：37

作者：

BIBEL, GD

KUMAR, A

REDDY, S

HANDSCHUH, R

机构：

[1] University of Nortii Dakota, Grand Forks, ND

[2] University of Akron, Akron, OH

[3] U.S. Army Research Laboratory, Lewis Research Center, Cleveland, OH

来源：

JOURNAL OF MECHANICAL DESIGN | 1995年 / 117卷 / 02期

关键词：

D O I：

10.1115/1.2826128

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A procedure is presented for performing three-dimensional stress analysis of spiral bevel gears in mesh using the finite element method. The procedure involves generating a finite element model by solving equations that identify tooth surface coordinates. Coordinate transformations are used to orientate the gear and pinion for gear meshing. Contact boundary conditions are simulated with gap elements. A solution technique for correct orientation of the gap elements is given. Example models and results ave presented.

引用

页码：235 / 240

页数：6

共 10 条

[1]

Litvin F.L., Theory of Gearing, (1989)

[2]

Huston R., Coy J., A Basic for Analysis of Surface Geometry of Spiral Bevel Gears, Advanced Power Transmission Technology, pp. 317-334, (1981)

[3]

Tsai Y.C., Chin P.C., Surface Geometry of Straight and Spiral Bevel Gears, ASME Journal of Mechanisms, Transmissions and Automation in Design, 109, 4, pp. 443-449, (1987)

[4]

Cloutier L., Gosselin C., Kinematic Analysis of Bevel Gears, (1984)

[5]

Litvin F.L., Tsung W.J., Lee H.T., Generation of Spiral Bevel Gears with Conjugate Tooth Surfaces and Tooth Contact Analysis, (1987)

[6]

Litvin F.L., Lee H.T., Generation and Tooth Contact Analysis of Spiral Bevel Gears with Predesigned Parabolic Functions of Transmission Errors, (1989)

[7]

Chao H.C., Baxter M., Cheng H.S., A Computer Solution for the Dynamic Load, Lubricant Film Thickness, and Surface Temperatures in Spiral Bevel Gears, Advanced Power Transmission Technology, pp. 345-364, (1981)

[8]

Drago R.J., Uppaluri B.R., Large Rotorcraft Transmission Technology Development Program, Vol. I, (1983)

[9]

Handschuh R.F., Litvin F.L., A Method of Determining Spiral-Bevel Gear Tooth Geometry for Finite Element Analysis, NASA Tp-3096M AVSCOM TR 91-C-020, (1991)

[10]

Burden R.L., Faires J.D., Numerical Analysis, (1985)

← 1 →