HIGH-GAIN CONTROL AND TUNING STRATEGY FOR VANE-TYPE RECIPROCATING PNEUMATIC SERVO DRIVES

被引：2

作者：

PU, J

MOORE, PR

WESTON, RH

机构：

[1] Department of Manufacturing Engineering, Loughborough University of Technology, Loughborough, Leics

来源：

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1991年 / 29卷 / 08期

关键词：

D O I：

10.1080/00207549108948033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Pneumatic servo drives often demonstrate significant non-linearities and low natural frequency. This paper studies the feasibility in employing such drives to achieve simple motion profile following through adopting a high-gain control approach. A new design model is presented, which differs from previous research studies and provides the basis for formulating the control approach. A vane-type reciprocating actuator has been chosen for this study. The effects of various controller gain terms on dynamic responses and system stability are illustrated. A tuning procedure is thus identified on the basis of analytical and experimental observations.

引用

页码：1587 / 1601

页数：15

共 12 条

[1]

Astrom K.I., Adaptive Control, (1989)

[2]

Backe W., The Application ofServo-Pneumatic Drives for Flexible Mechanical Handling Techniques, Robotics, 2, pp. 45-56, (1986)

[3]

Blackburn J.F., Reethof G., Lowen S.J., Fluid Power Control, (1960)

[4]

Botting L.R., Evnon G.T., Foster K., The Response of a High Pressure Pneumatic Servo-Mechanism to Step and Sinewave Inputs, Proceedings of the Institute Ofmechanical Engineers, 1, 54, (1970)

[5]

Burrows C.R., Effect of Position on the StabiIITy of Pneumatic Servo Mechanisms, Research Notes in Mechanical Engineering Science, 2, 6, pp. 615-616, (1969)

[6]

Drazan P.J., Jeffrev M.J., Microprocessor Control and Pneumatic Drive of a Manipulating Arm, In Proceedings 6Th International Symposium on Industrial Robots, pp. D2-D9, (1976)

[7]

Leaney P.G., The Modelling and Computer Aided Design of Hydraulic Servosystems, (1986)

[8]

Mo P.T., A New Technique in Pneumatic Servomechanism Modelling, Forum on Applications in Fluid Mechanics, (1988)

[9]

Nagarajan R., Weston R.H., Front End Control Schemes for Pneumatic ServoDriven Modules, Imech, (1985)

[10]

Pu J., Advancements in the Programmable Motion Control of Pneumatic Drives for Robots and Other Flexible Machines. PhD thesis, Loughborough University of Technology, (1988)

← 1 2 →