Dynamic modeling and analysis of the supercritical tail drive system of a helicopter considering the mounting platform deformation

被引:6
作者
Zhang, Chao [1 ]
Zhu, Rupeng [1 ]
Chen, Weifang [1 ]
Wang, Dan [1 ]
Nong, Su [1 ]
Mao, Sunquan [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Natl Key Lab Sci & Technol Helicopter Transmiss, Nanjing 210016, Peoples R China
基金
中国国家自然科学基金;
关键词
Dynamic; Supercritical; Tail drive system; Helicopter; COUPLING-BEARING SYSTEM; BALLISTIC IMPACT;
D O I
10.1007/s11071-024-09553-4
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
With the high-speed and lightweight development of the helicopter transmission system, the tail drive system is gradually adopting a supercritical design. However, the understanding of the vibration mechanism of the supercritical tail drive system isn't yet clear. Hence, considering the angular bending moment introduced by the axial friction force of the spline coupling and the mounting platform deformation excitation force, this paper established the system's finite dynamic equation considering the mounting platform deformation, which is verified by finite element software. The research results showed that: at supercritical speed, when the spline lubrication is poor, the angular bending moment vector of the spline coupling will introduce a self-excited vibration component that is approximately equal to the first-order critical speed of the horizontal tail short shaft to the horizontal tail shafts, and the intermediate reducer gear pair, thereby stimulating the self-excited vibration phenomenon. The mounting platform deformation at the bearing support position at the spline coupling and the horizontal tail shaft, and the intermediate reducer support position would introduce the speed high-order harmonic components 2x, 3x, and 4x into the frequency-domain response. The effect of the self-excited vibration phenomenon is significantly greater than the mounting platform deformation. In engineering, the spline lubrication status can be determined by observing the appearance of the self-excited vibration components in the vibration response of the horizontal tail short shafts. And the mounting platform deformation can be determined by observing the speed high-order harmonic components in the vibration response at system's different positions. The dynamic model established in this paper can provide a theoretical basis for the dynamic analysis and optimization of the supercritical tail drive system of helicopters.
引用
收藏
页码:9063 / 9094
页数:32
相关论文
共 32 条
[1]   Nonlinear excitation and mesh characteristics model for spiral bevel gears [J].
Chen, Siyu ;
Zhang, Aiqiang ;
Wei, Jing ;
Lim, Teik C. .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 257
[2]   A study of effects of tooth surface wear on time-varying mesh stiffness of external spur gear considering wear evolution process [J].
Chen, Wei ;
Lei, Yulong ;
Fu, Yao ;
Hou, Liguo .
MECHANISM AND MACHINE THEORY, 2021, 155 (155)
[3]   Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth [J].
Chen, Zaigang ;
Shao, Yimin .
ENGINEERING FAILURE ANALYSIS, 2011, 18 (08) :2149-2164
[4]   Experimental procedure for the evaluation of tooth stiffness in spline coupling including angular misalignment [J].
Cura, Francesca ;
Mura, Andrea .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2013, 40 (02) :545-555
[5]   Load distribution in spline coupling teeth with parallel offset misalignment [J].
Cura, Francesca ;
Mura, Andrea ;
Gravina, Michele .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2013, 227 (10) :2195-2205
[6]   Vibration signatures of a rotor-coupling-bearing system under angular misalignment [J].
da Silva Tuckmantel, Felipe Wenzel ;
Cavalca, Katia Lucchesi .
MECHANISM AND MACHINE THEORY, 2019, 133 :559-583
[7]   Fatigue crack propagation in a helicopter component subjected to impact damage [J].
Fossati, M. ;
Pagani, M. ;
Giglio, M. ;
Manes, A. .
DEFENCE TECHNOLOGY, 2021, 17 (02) :416-428
[8]  
Friswell MI., 2010, DYNAMICS ROTATING MA, DOI 10.1017/CBO9780511780509
[9]   Terminal ballistic effect on the crack growth assessment of a helicopter rotor drive [J].
Giglio, M. ;
Manes, A. .
ENGINEERING FRACTURE MECHANICS, 2011, 78 (08) :1542-1554
[10]   Predicting ballistic impact failure of aluminium 6061-T6 with the rate-independent Bao-Wierzbicki fracture model [J].
Gilioli, A. ;
Manes, A. ;
Giglio, M. ;
Wierzbicki, T. .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2015, 76 :207-220