Effect of TiC Addition and Heating Mode on the Electrochemical Response of Powder Metallurgy Processed Corrosion-Resistant Austenitic and Ferritic Steels

被引：0
作者：
A. Muthuchamy
A. Raja Annamalai
机构：
[1] VIT University,Department of Manufacturing Engineering
来源：
Metal Science and Heat Treatment | 2018年 / 60卷
关键词：
corrosion-resistant (stainless) steels; composites; carbide particles; microwave sintering; corrosion;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Austenitic steel 316L and ferritic steel 434L produced by sintering of atomized powders with additions of different volume fractions (0, 4, 8, and 12 vol.%) of titanium carbide particles in microwave and conventional furnaces are studied. The microwave heating results in more intense densification, hardening, higher corrosion resistance, and grain refinement as compared to sintering in the conventional furnace. Steel 316L with 4 vol.% TiC sintered in the microwave furnace exhibits the highest corrosion resistance.
引用
收藏
页码：121 / 127
页数：6
相关论文
共 30 条
[1]  
Wang L(2004)Tensile and wear properties of TiC reinforced 420 stainless steel fabricated by in situ synthesis J. Southeast Univ. 20 846-491
[2]  
Zhang SY(1993)Titanium carbonitride-based cermets – processes and properties Mater. Sci. Eng. A 163 141-148
[3]  
Srivatsan TS(1997)Tensile deformation and fracture behavior of tool-steel-based metal-matrix composites. Part A Appl. Sci. Manuf. 28 377-385
[4]  
Annigeri R(1997)Ball milling assisted low temperature formation of iron – TiC composite Scr. Mater. 36 989-993
[5]  
Prakash A(2001)Elevated temperature sliding wear behavior of TiC-reinforced steel matrix composites Wear 251 1444-1451
[6]  
Chen Y(2002)Review on the various synthesis routes of TiC reinforced ferrous based composites J. Mater. Sci. 37 3881-3892
[7]  
Degnan CC(2000)Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation Mater. Sci. Eng. A 311 13-21
[8]  
Shipway PH(2012)Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering Adv. Powder Technol. 23 419-425
[9]  
Wood JW(2000)Characterization of Fe3Al-base intermetallic alloys fabricated by mechanical alloying and HIP consolidation Mater. Sci. Eng. A 292 83-89
[10]  
Das K(2004)Tensile properties of nanometric Al Mater. Chem. Phys. 85 438-443
123