Finishing with Free and Bound Abrasive

被引:0
作者
Muratov K.R. [1 ]
Gashev E.A. [1 ]
Ablyaz T.R. [1 ]
机构
[1] Perm National Research Polytechnic University, Perm
关键词
abrasive lapping; bound abrasive; cutting rate; finishing; forced rotation; free abrasive; free rotation; single crystals; surface roughness; workpiece rotation;
D O I
10.3103/S1068798X19100186
中图分类号
学科分类号
摘要
Abstract: Abrasive finishing of a single crystal by means of free and bound abrasive is compared in conditions with forced and free workpiece rotation. Experimental data show that the influence of forced and free workpiece rotation is different for finishing by means of free and bound abrasive. In machining by bound abrasive with forced rotation, the cutting rate and productivity are 25% higher, on average, than with free rotation. © 2019, Allerton Press, Inc.
引用
收藏
页码:872 / 874
页数:2
相关论文
共 8 条
[1]  
Ipolitov G.M., Dovodka pretsizionnykh detalei mashin (Finishing of Precision Machine Parts), (1978)
[2]  
Orlov P.N., Tekhnologicheskoe Obespechenie Kachestva Detalei Metodami Dovodki (Technological Support of Quality of the Parts by Finishing), (1988)
[3]  
Ardamatskii A.L., Almaznaya Obrabotka Opticheskikh Detalei (Diamond Processing of Optic Parts), (1978)
[4]  
Muratov K.R., Khanov A.M., Gashev E.A., Grinding of single crystals by bound abrasive, Russ. Eng. Res, 35, pp. 16-18, (2015)
[5]  
Yuan J., Yao W., Zhao P., Kinematics and trajectory of both-sides cylindrical lapping process in planetary motion type, Int. J. Mach. Tool Manuf, 92, pp. 60-71, (2015)
[6]  
Muratov K.R., Influence of rigid and frictional kinematic linkages in tool–workpiece contact on the uniformity of tool wear, Russ. Eng. Res, 36, pp. 321-323, (2016)
[7]  
Kumanin K.G., Formoobrazovanie opticheskikh poverkhnostei (Forming of Optic Surfaces), (1962)
[8]  
Bakul' V.N., Osnovy Proektirovaniya I Tekhnologiya Izgotovleniya Abrazivnogo I Almaznogo Instrumenta (Fundamental Designing and Production Technology of Abrasive and Diamond Tools), (1975)