Effects of hole diameter and ply angle on the mechanical behaviour of hole-clinched joints in carbon fibre reinforced polymers and aluminium alloy sheets

被引：0
作者：
Yang Liu
Weimin Zhuang
Shijie Wu
机构：
[1] Jilin University,State Key Laboratory of Automotive Simulation and Control
[2] SAIC Volkswagen Automotive Co. Ltd.,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 106卷
关键词：
Hole clinching; CFRP; Failure process; Static properties; Hole diameter; Ply angle;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present paper investigates the joinability of unidirectional carbon fibre reinforced polymers (CFRP) and aluminium alloys by the method of hole clinching. The static properties and failure process of the single-lap joints were tested. The effects of the hole diameter and the ply angle of CFRP on the static properties and failure processes of hole-clinched joints are discussed. The obtained results demonstrated that the joints with different ply angles have similar maximum loads, while the ply angle affects the failure mode of the joints. Increasing the hole diameter of the CFRP enhances the strength and energy absorption of the joints.
引用
收藏
页码：5345 / 5352
页数：7
相关论文
共 97 条
  • [1] Lambiase F(2015)Joinability of different thermoplastic polymers with aluminium AA6082 sheets by mechanical clinching Int J Adv Manuf Technol 80 1995-2006
  • [2] He X(2014)A review of numerical analysis of friction stir welding Prog Mater Sci 65 1-66
  • [3] Gu F(2016)Fast joining of aluminum sheets with Glass Fiber Reinforced Polymer (GFRP) by mechanical clinching J Mater Process Technol 236 241-251
  • [4] Ball A(2019)Investigations on a material-specific joining technology for CFRP hybrid joints along the automotive process chain Compos Struct 230 111533-29
  • [5] Lambiase F(2017)Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys-a review Compos Part A 101 1-188
  • [6] Durante M(2017)Two-steps clinching of aluminum and Carbon Fiber Reinforced Polymer sheets Compos Struct 164 180-36
  • [7] Di Ilio A(2014)Study of mechanical properties for copper alloy H62 sheets joined by self-piercing riveting and clinching J Mater Process Technol 216 28-13
  • [8] Vorderbrueggen J(2019)Failure modes of mechanical clinching in metal sheet materials Thin-Walled Struct 144 106281-78
  • [9] Meschut G(2017)Influence of heat treatment on mechanical properties of clinched joints in titanium alloy sheets Int J Adv Manuf Technol 91 1-361
  • [10] Pramanik A(2019)The influence of tool geometry and process parameters on joined sheets by clinching J Braz Soc Mech Sci Eng 41 67-250
12345678910