System for Effective Machining of Large Parts

被引：2

作者：

Khurtasenko A.V. ^{[1
]}

Shrubchenko I.V. ^{[1
]}

Voronkova M.N. ^{[1
]}

Maslova I.V. ^{[1
]}

机构：

[1] Shukhov Belgorod State Technological University, Belgorod

来源：

Russian Engineering Research | 2022年 / 42卷 / 5期

关键词：

basing; drums; large parts; machining module; machining systems; restorative machining; rotary kilns;

D O I：

10.3103/S1068798X22050161

中图分类号：

学科分类号：

摘要：

Abstract: An effective system for machining large solids of revolution with basing on two rollers is outlined. Such parts may be machined in situ, without the need for disassembly. In practice, restorative machining is required to eliminate the shape errors that appear in the course of operation. By the proposed method, the machining module may be based on the surface of the supporting rollers and possible displacements of the tire surface may be taken into account. Such basis automatically ensures that longitudinal supply is parallel to the axis of the workpiece, thereby saving time and eliminating possible machining errors. © 2022, Allerton Press, Inc.

引用

页码：510 / 512

页数：2

共 10 条

[1]

Vijayan S.N., Sendhilkumar S., Industrial applications of rotary kiln in various sectors – A review, Int. J. Eng. Innovation Res, 3, pp. 342-345, (2014)

[2]

Ramanenka D., Stjernberg J., Jonsen P., FEM investigation of global mechanisms affecting brick lining stability in a rotary kiln in cold state, Eng. Failure Anal, 59, pp. 554-569, (2016)

[3]

Duganov V.Y., Shrubchenko I.V., Dmitriev S.S., Factors affecting the deformation of the bandages of rotating cement kilns and entailing the adjustment of the angle of the cutting tool, Prom-st. Stroit. Mater. Ser. 1. Tsement, Prom-st, 1-2, pp. 9-13, (2000)

[4]

Shrubchenko I.V., Hurtasenko A.V., Voronkova M.N., Determining bandages rolling surfaces shape and forming bands and support rollers of heavy processing barrels, Middle East J. Sci. Res, 18, pp. 1479-1485, (2013)

[5]

Duyun T.A., Shrubchenko I.V., Hurtasenko A.V., Modeling a repair machining of a rotary kiln tire, IOP Conf. Ser.: Mater. Sci. Eng., 2019, 560, no. 1,

[6]

Murygina L.V., Cand. Sci., (2013)

[7]

Shrubchenko I.V., Duganov V.Y., Arkhipova N.A., Treatment of rolling surfaces of rotating furnace bandages with a dynamic self-aligning caliper, Prom-st. Stroit. Mater. Ser. 1. Tsement, Prom-st, 1-2, pp. 50-54, (2000)

[8]

Shrubchenko I.V., Treatment of rolling surfaces of support rollers for rotating furnaces, Stanki Instrum., 3, (2004)

[9]

Goncharov M.S., Khurtasenko A.V., Shrubchenko I.V., Features of forming at shroud restorative machining by portable machine tools, Vestn. Irkutsk. Gos. Tekh. Univ., 21, 7, pp. 10-25, (2017)

[10]

Timofeev S.P., Khurtasenko A.V., Shrubchenko I.V., Calculation of the cutting depth when processing the surfaces of large-sized parts with a non-stationary axis of rotation, Vestn. Belgorod. Gos. Tekhnol. Univ. Im. V.G. Shukhova, 2, pp. 68-74, (2018)

← 1 →