A 3D printed acoustofluidic nozzle-diffuser microfluidic pump

Microfluidic flow control systems are critical components for on-chip biomedical applications. This study introduces a new micropump for on-chip sample preparation and analysis by using an acoustic nozzle diffuser mechanism. The micropump implements a commercially available transducer and control board kit with 3D-printed fluid reservoirs. In this micropump, conic-shaped micro-holes on the metal sheet cover of the transducer are employed as oscillating nozzle diffuser micro arrays to achieve directional flow control. The micropump is shown to efficiently pump water and particle mixtures exceeding flow rates of 515 mu l/min at a 12-volt input voltage. In addition, owing to the small size of the nozzle hole opening, larger particles can also be filtered out from a sample solution during fluid pumping enabling a new function. Importantly, the micropump can be fabricated and assembled without needing a cleanroom, making it more accessible. This feature is advantageous for researchers and practitioners, eliminating a significant barrier to entry. By combining commercially available components with 3D printing technology, this micropump presents a cost-effective and versatile solution for on-chip applications in biomedical research and analysis.