Assessment of the Stress–Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone

被引：0
|
作者：
M. V. Androsenko
机构：
[1] Nosov Magnitogorsk State Technical University,
来源：
Metallurgist | 2019年 / 63卷
关键词：
modeling; strength; stresses; roller assembly;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The results of the mechanical modeling of the foot roller assemblies in the secondary-cooling zone (SCZ) of a continuous caster are described. The stress–strain behavior of the strand in the SCZ and the stress relief in the slab after a reduction in the distance between the roller rows in the assembly are estimated.
引用
收藏
页码：350 / 355
页数：5
相关论文
共 12 条
  • [1] Assessment of the Stress-Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone
    Androsenko, M. V.
    METALLURGIST, 2019, 63 (3-4) : 350 - 355
  • [2] Density distribution of the spray from flat spray nozzles in the secondary-cooling zone of a continuous caster
    V. D. Tutarova
    D. S. Safonov
    A. N. Shapovalov
    Metallurgist, 2012, 56 : 438 - 442
  • [3] Density distribution of the spray from flat spray nozzles in the secondary-cooling zone of a continuous caster
    Tutarova, V. D.
    Safonov, D. S.
    Shapovalov, A. N.
    METALLURGIST, 2012, 56 (5-6) : 438 - 442
  • [4] Analysis of acting forces on rollers under the billet caster mould in the zone of secondary cooling
    Androsenko, Mariya
    Reshetnikova, Elena
    Tyuteryakov, Nail
    MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 2458 - 2461
  • [5] Effect of the current distribution between the electric motors of the pinch rollers in the secondary cooling zone of a continuous caster on the quality of the cast semifinished product
    Takhautdinov, RS
    Luk'yanov, SI
    Vdovin, KN
    Bodyaev, YA
    Nosov, AD
    Suspitsin, VG
    Selivanov, IA
    Sidel'nikova, EI
    METALLURGIST, 2002, 46 (1-2) : 24 - 27
  • [6] Effect of the Current Distribution between the Electric Motors of the Pinch Rollers in the Secondary Cooling Zone of a Continuous Caster on the Quality of the Cast Semifinished Product
    R. S. Takhautdinov
    S. I. Luk'yanov
    K. N. Vdovin
    Yu. A. Bodyaev
    A. D. Nosov
    V. G. Suspitsin
    I. A. Selivanov
    E. I. Sidel'nikova
    Metallurgist, 2002, 46 : 24 - 27
  • [7] The Influence of Support Rollers of Continuous Casting Machines on Heat Transfer and on Stress-Strain of Slabs in Secondary Cooling
    Xia, G.
    Schiefermueller, A.
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (08) : 652 - 659
  • [8] INVESTIGATION OF THERMAL STATE OF SURFACE OF CONTINUOUSLY CAST STRAND IN SECONDARY COOLING ZONE OF CONTINUOUS SLAB CASTERS
    AKMEN, RG
    KUBRIK, BI
    NOSOCHENKO, OV
    NIKOLAEV, GA
    EMELYANOV, VV
    STEEL IN THE USSR, 1987, 17 (06): : 285 - 287
  • [9] Analysis of Changes in the Stress-Strain State and Permeability of a Terrigenous Reservoir Based on a Numerical Model of the Near-Well Zone with Casing and Perforation Channels
    Chernyshov, Sergey
    Popov, Sergey
    Wang, Xiaopu
    Derendyaev, Vadim
    Yang, Yongfei
    Liu, Huajie
    APPLIED SCIENCES-BASEL, 2024, 14 (21):
  • [10] COMPARATIVE ANALYSIS OF THE ANALYTICAL AND NUMERICAL METHODS FOR CALCULATING THE STRESS-STRAIN STATE OF THE NEAR-WELLBORE ZONE BASED ON THE ELASTIC MODEL TAKING INTO ACCOUNT THE MAIN STRUCTURAL ELEMENTS OF THE WELL
    Popov, Sergey N.
    Chernyshov, Sergey E.
    Krivoshchekov, Sergey N.
    BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2023, 334 (05): : 94 - 102
12