Foam-Filled Grooved Tubes with Circular Cross-Section Under Axial Compression: A Theoretical Analysis

被引：0
作者：
Abbas Niknejad
Mohammad Mahdi Abedi
Gholam Hossein Liaghat
Mohammad Zamani Nejad
机构：
[1] Yasouj University,Mechanical Engineering Department
[2] Tarbiat Modares University,Mechanical Engineering Department
来源：
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2016年 / 40卷
关键词：
Axial compression; Energy method; Folding; Grooved tube; Polyurethane foam;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this article, some theoretical relations are derived to predict the instantaneous folding force and the absorbed energy by the empty and polyurethane foam-filled grooved tubes with circular cross-section during the first fold formation under the axial loading. Five different modes of deformation are considered in the theoretical model of deformation: bending around two internal circular hinge lines, bending around an external circular hinge line, extensional deformation in the folding arms, axial compression of the polyurethane foam, and interaction effects between polyurethane foam and inner wall of the grooved tube. Also, based on the experiments, a semi-empirical relation is suggested to predict the effective axial displacement at the end of a complete fold creation in the polyurethane foam-filled grooved tubes. To verify the theoretical analyses, some axial compression tests were carried out on the empty and filled grooved tubes. Comparison of the theoretical predictions with the corresponding experimental results showed a good correlation.
引用
收藏
页码：155 / 167
页数：12
相关论文
共 80 条
[11]  
Bardi FC(2010)Experimental and theoretical investigation of the first fold creation in thin walled columns Acta Mech Solida Sin 23 353-360
[12]  
Yun HD(2011)Theoretical and experimental studies of the instantaneous folding force of the polyurethane foam-filled square honeycombs Mater Des 32 69-75
[13]  
Kyriakides S(2012)Experimental investigation on the lateral compression in the foam-filled circular tubes Mater Des 36 24-34
[14]  
Daneshi GH(2012)Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis Mater Des 37 144-151
[15]  
Hosseinipour SJ(2013)Empty circular metal tubes in the splitting process theoretical and experimental studies Thin Walled Struct 72 48-60
[16]  
Guden M(2015)Absorbed energy by foam-filled quadrangle tubes during the crushing process by considering the interaction effects Arch Civ Mech Eng 15 376-391
[17]  
Kavi H(2002)Strain rate sensitivity and defects in steel foam Mater Sci Eng, A 323 358-366
[18]  
Lee KS(2000)Experimental and numerical studies of foam-filled sections Int J Impact Eng 24 509-534
[19]  
Kim SK(2004)Exploiting the fracture properties of carbon fibre composites to design lightweight energy absorbing structures Eng Fail Anal 11 677-694
[20]  
Yang IY(2005)Dynamic compressive strength properties of aluminium foams. Part II–shock theory and comparison with experimental data and numerical models J Mech Phys Solids 53 2206-2230
12345678