Softening and Melting Behavior of Mixed Burden for Oxygen Blast Furnace

被引:0
作者
Xiu-wei An
Jing-song Wang
Rong-zong Lan
Yi-hua Han
Qing-guo Xue
机构
[1] University of Science and Technology Beijing,State Key Laboratory of Advanced Metallurgy School of Metallurgical and Ecological Engineering
来源
Journal of Iron and Steel Research International | 2013年 / 20卷
关键词
oxygen blast furnace; softening; melting; mixed burden; basicity; reduction degree;
D O I
暂无
中图分类号
学科分类号
摘要
The behaviors of mixed burden in the cohesive zone of oxygen blast furnace were studied by softening and melting tests, and the influence of reducing gas and burden basicity on the softening and melting behaviors of mixed burden was also investigated. The results indicated that the softening range became wide, however, the melting range narrowed sharply in the atmosphere of oxygen blast furnace. The permeability of burden in the oxygen blast furnace was obviously improved comparing with the conventional blast furnace. In addition, the content of sulphur in the dripping iron of oxygen blast furnace was much lower than that of conventional blast furnace, however, the content of carbon increased. An optimum basicity of burden, which could lead to the appearance of the narrower melting range and better permeability of burden, was obtained in the atmosphere of oxygen blast furnace.
引用
收藏
页码:11 / 16
页数:5
相关论文
共 30 条
[1]  
Okamoto T(1972)On the Highly Oxygen-Enriched Blast Furnace Operation Utilizing Top Gas for Ammonia Synthesis [J] Tetsu-to-Hagane 58 637-undefined
[2]  
Tada T(1992)Theoretical Study on an Oxygen Blast Furnace Using Mathematical Simulation Model [J] ISIJ International 32 701-undefined
[3]  
Sugiura S(1992)Experimental Study on an Oxygen Blast Furnace Process Using a Blast Furnace Test Plant [J] ISIJ International 32 709-undefined
[4]  
Yamaoka H(1996)Suspension Smelting Reduction—A New Method of Hot Iron Production [J] Steel Times 224 398-undefined
[5]  
Kamei Y(1984)The Feasibility of Nitrogen-Free Blast Furnace Operations [J] Iron and Steel Society of AIME Transactions 5 25-undefined
[6]  
Yamaoka H(1988)Blast Furnace Operation With Full Oxygen Blast [J] Iron-making and Steelmaking 15 287-undefined
[7]  
Kamei Y(1992)Process Characteristics of a Commercial-Scale Oxygen Blast Furnace Process With Shaft Gas Injection [J] ISIJ International 32 838-undefined
[8]  
Fink F(2009)The Trial of the Top Gas Recycling Blast Furnace at LKAB’s EBF and Scale-Up [J] Revue de Métallurgie 106 387-undefined
[9]  
Lu W K(2009)ULCOS-Pilot Testing of the Low-CO Revue de Métallurgie 106 1-undefined
[10]  
Kumar R V(1998) Blast Furnace Process at the Experimental BF in Luleâ [J] ISIJ International 8 239-undefined