Springback prediction method for double-curved workpiece considering plate anisotropy in multi-point forming

被引:0
作者
Chunguo Liu
Ming Li
Tao Yue
机构
[1] Jilin University (Nanling Campus),Roll Forging Research Institute
[2] Jilin University (Nanling Campus),College of Materials Science and Engineering
来源
Journal of Mechanical Science and Technology | 2021年 / 35卷
关键词
Anisotropy; Double-curved plate; Multi-point forming; Springback;
D O I
暂无
中图分类号
学科分类号
摘要
Springback is adversely affected by mechanical anisotropy in the process of sheet metal forming. In this work, an analytical method was proposed to predict the springback of the double-curved workpiece in multi-point forming process. To characterize the anisotropy of the AA7B04 aluminum plate, the plate was divided into several layers along thickness direction. And in each layer, the calculation of bending moment was done respectively based on von Mises, Hill’s 48 and Yld2004-18p yield criterion. After springback, the neutral surface curvature was calculated and the profile of the neutral surface was constructed by the Bezier surface blending method. To verify the prediction method, finite element simulation and bending experiment were performed. The results show that the predictive accuracy of the method was more accurate than that with the isotropy model. Additionally, the most accurate constitutive model to describe the in-plane anisotropy of AA7B04 aluminum was the Yld2004-18p yield criterion.
引用
收藏
页码:2623 / 2636
页数:13
相关论文
共 76 条
  • [1] Liu C G(2018)A springback prediction method for a cylindrical workpiece bent with the multi-point forming method Int. J. Adv. Manuf. Technol. 101 2571-2583
  • [2] Yue T(2007)Method of multipoint continuous forming for the free form surface parts Chin. J. Mater. Eng. 12 155-159
  • [3] Li D L(2013)Research on residual stress for hull plate in cold forming Adv. Mater. Res. 838–841 347-354
  • [4] Li M Z(2018)Research on form-ability in multi-point forming with different elastic pads Int. J. Adv. Manuf. Technol. 98 1887-1901
  • [5] Hu Z Q(2017)Research on swinging unit multi-point die with discrete elastic cushion in flexible stretch forming process Int. J. Adv. Manuf. Technol. 91 237-245
  • [6] Cai Z Y(2013)Springback analysis of rectangular sectioned bar of nonlinear work hardening materials under torsional loading Appl. Mech. Mater. 393 422-434
  • [7] Gong X P(2016)Multiple-iteration springback compensation of tailor welded blanks during stamping forming process Mater. Design 102 247-254
  • [8] Yan R J(2004)The transition from discontinuous to continuous recrystallization in some aluminium alloys: II. Annealing behaviour Acta. Mater. 52 3251-3262
  • [9] Lin Y(2007)Effect of normal anisotropy on springback Journal of Materials Processing Technology 190 300-304
  • [10] Xin C(2018)Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending Int. J. Solids Struct. 151 152-164