Gold-functionalized graphene as conductive filler in UV-curable epoxy resin

被引:0
|
作者
M. Martin-Gallego
M. A. Lopez-Manchado
P. Calza
I. Roppolo
M. Sangermano
机构
[1] Instituto de Ciencia y Tecnologia de Polimeros,Dipartimento di Chimica
[2] ICTP-CSIC,Center for Space Human Robotics
[3] Università di Torino,Dipartimento di Scienza Applicata e Tecnlogia
[4] Istituto Italiano di Tecnologia,undefined
[5] Politecnico di Torino,undefined
来源
关键词
Gold Nanoparticles; Graphene Sheet; Conductive Filler; Charge Transfer Mechanism; Epoxy Nanocomposite;
D O I
暂无
中图分类号
学科分类号
摘要
Graphene sheets (GNPs) were functionalized with gold nanoparticles via a spontaneous deposition of gold particles on its surface occurred by chemical reduction of (Au3+). Even after only 1 min of reaction, the reduction of Au3+ into metallic Au0, takes place in evidencing the rapid and spontaneous character of the reduction. The particles, after only 3 min of deposition, have very small diameters, with average centred at 17 nm. The Au–GNP nanofillers were dispersed into UV-curable epoxy resin. Conductivity of the epoxy crosslinked samples containing Au–GNP nanofiller were compared to the values obtained for epoxy nanocomposite containing the same amount of bare graphene; the electrical conductivity was significantly increased by the addition of Au–GNP nanofiller, of about four orders of magnitude. This could be attributed to a charge transfer mechanism, which is strongly enhanced by the presence of gold NPs.
引用
收藏
页码:605 / 610
页数:5
相关论文
共 50 条
  • [41] Preparation and Properties of New UV-curable Naphthyl Epoxy Acrylates
    Liu, Hongbo
    Lin, Feng
    Chen, Mingcai
    Xu, Kai
    IRANIAN POLYMER JOURNAL, 2010, 19 (03) : 219 - 227
  • [42] Superhydrophobic films of UV-curable fluorinated epoxy acrylate resins
    Lin, Yung-Hsin
    Liao, Keng-Huan
    Huang, Chih-Kai
    Chou, Nai-Kuan
    Wang, Shoei-Shen
    Chu, Shu-Hsun
    Hsieh, Kuo-Huang
    POLYMER INTERNATIONAL, 2010, 59 (09) : 1205 - 1211
  • [43] Dielectric Properties and 3D-Printing Feasibility of UV-Curable Resin/Micron Ceramic Filler Composites
    Fu, Yijia
    Li, Wendong
    Xu, Man
    Wang, Chao
    Zhang, Liyuan
    Zhang, Guanjun
    ADVANCES IN POLYMER TECHNOLOGY, 2022, 2022
  • [44] Kinetic Analysis of UV-curable Epoxy Resins for Micromachining applications
    Yu, Voytekunas Vanda
    Lin, Ng Feng
    Ling, Koh Chai
    Marc J M, Abadie
    NEMS/MEMS TECHNOLOGY AND DEVICES, 2009, 74 : 299 - +
  • [45] UV-curable methacrylic epoxy dispersions for cationic electrodeposition coating
    Kim, Y. B.
    Kim, H. K.
    Hong, J. W.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (06) : 5566 - 5570
  • [46] UV-curable resin microlenses on optical pillars for optical interconnect
    Baharudin, Nurul Atiqah
    Fujikawa, Chiemi
    Mikami, Osamu
    Idrus, Sevia M.
    Ambran, Sumiaty
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2019, 58 (SJ)
  • [47] Study of UV-curable composite resin of transfer tray for orthodontics
    Yang L.
    Wu W.
    Xu B.-H.
    Jia P.-Z.
    Nie J.
    Frontiers of Materials Science in China, 2008, 2 (4): : 430 - 436
  • [48] UV-curable methacrylic epoxy dispersions for cationic electrodeposition coating
    Kim, Y.B.
    Kim, H.K.
    Hong, J.W.
    Journal of Applied Polymer Science, 2006, 102 (06): : 5566 - 5570
  • [49] Preparation and characterization of UV-curable epoxy/silica nanocomposite coatings
    Isin, Derya
    Kayaman-Apohan, Nilhan
    Gungor, Atilla
    PROGRESS IN ORGANIC COATINGS, 2009, 65 (04) : 477 - 483
  • [50] Click-chemistry approach for graphene modification: effective reinforcement of UV-curable functionalized graphene/polyurethane acrylate nanocomposites
    Yu, Bin
    Shi, Yongqian
    Yuan, Bihe
    Liu, Lu
    Yang, Hongyu
    Tai, Qilong
    Lo, Siuming
    Song, Lei
    Hu, Yuan
    RSC ADVANCES, 2015, 5 (18): : 13502 - 13506