Optimization of the Formations Parameters of Hollow Channels in Glass by Direct Laser Writing and Selective Etching

被引：0

作者：

T. O. Lipat’eva

S. I. Stopkin

A. S. Lipat’ev

S. V. Lotarev

S. S. Fedotov

V. N. Sigaev

机构：

[1] D. I. Mendeleev University of Chemical Technology of Russia (MUCTR),

来源：

Glass and Ceramics | 2022年 / 79卷

关键词：

quartz glass; wet etching; microfluidic(s); femtosecond laser; hollow channels; selectivity;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The method of two-stage formation of hollow channels in glass by direct laser writing and subsequent selective etching is profitably used in the manufacture of microfluidics devices. In the present work, the influence of the concentration of the etching solution, the velocity of the laser beam, and the energy of laser pulses on the etching rate, selectivity, and roughness of hollow channels in quartz glass were investigated. For hollow channels, an etching rate 300 μm/h can be achieved together with very high selectivity (680) by using a 1M NaOH solution.

引用

页码：249 / 252

页数：3

共 40 条

[1]

Funano SI(2021)A simple and reversible glass–glass bonding method to construct a microfluidic device and its application for cell recovery Lab. on a Chip. 21 2244-2254

[2]

Ota N(2019)Microsensing of plutonium with a glass optofluidic device Opt. Eng. 58 060502-321

[3]

Tanaka Y(2017)Multifunctional system-on-glass for lab-on-chip applications Biosens. Bioelectr. 93 315-13

[4]

Allenet T(2019)Maskless, rapid manufacturing of glass microfluidic devices using a picosecond pulsed laser Sci. Rep. 9 1-269

[5]

Geoffray F(2001)Multilayer microfluidic glass chips for microanalytical applications Fresenius’ J. Analyt. Chem. 371 261-23499

[6]

Bucci D(2021)Two-photon polymerization of nanocomposites for the fabrication of transparent fused silica glass microstructures Adv. Mater. 33 2006341-109

[7]

Petrucci G(2021)Optimization of selective laser etching (SLE) for glass micromechanical structure fabrication Opt. Express 29 23487-29678

[8]

Caputo D(2019)Three-dimensional femtosecond laser nanolithography of crystals Nature Photonics 13 105-24356

[9]

Lovecchio N(2018)Femtosecond laser induced selective etching in fused silica: optimization of the inscription conditions with a high-repetition-rate laser source Opt. Express 26 29669-35066

[10]

Wlodarczyk KL(2018)Optimization of ultrafast laser assisted etching in fused silica Opt. Express 26 24343-3637

← 1 2 3 4 →