Modeling of kinetics of isothermal idiomorphic ferrite formation in a medium-carbon vanadium-titanium microalloyed steel

被引：0
作者：
C. Capdevila
F. G. Caballero
C. García de Andrés
机构：
[1] Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC),the Department of Physical Metallurgy
来源：
Metallurgical and Materials Transactions A | 2001年 / 32卷
关键词：
Ferrite; Austenite; Material Transaction; Pearlite; Nucleation Site;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present article is concerned with the theoretical and experimental study of the growth kinetics of idiomorphic ferrite in a medium-carbon vanadium-titanium microalloyed steel. A theoretical model is presented to calculate the evolution of isothermal austenite-to-idiomorphic ferrite transformation with time for a given temperature. Moreover, the nature, size, and distribution of the inclusions that are responsible for the intragranular nucleation of idiomorphic ferrite have been characterized by scanning electron microscopy (SEM). Finally, the influence of austenite grain size in the isothermal decomposition of austenite in idiomorphic ferrite has been thoroughly analyzed. An excellent agreement (higher than 90 pct in R2) has been obtained between the experimental and predicted values of the volume fraction of idiomorphic ferrite.
引用
收藏
页码：1591 / 1597
页数：6
相关论文
共 50 条
  • [41] Nanostructured bainite transformation characteristics in medium-carbon steel subjected to ausforming and isothermal holding below martensite start temperature
    Kaikkonen, Pentti
    Ghosh, Sumit
    Somani, Mahesh
    Komi, Jukka
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 466 - 490
  • [42] Kinetics and formation mechanisms of intragranular ferrite in V-N microalloyed 600 MPa high strength rebar steel
    Jing Zhang
    Fu-ming Wang
    Chang-rong Li
    International Journal of Minerals, Metallurgy, and Materials, 2016, 23 : 417 - 424
  • [43] Effects of ausforming on isothermal bainite transformation behaviour and microstructural refinement in medium-carbon Si-Al-rich alloy steel
    Zhang, M.
    Wang, Y. H.
    Zheng, C. L.
    Zhang, F. C.
    Wang, T. S.
    MATERIALS & DESIGN, 2014, 62 : 168 - 174
  • [44] Three-dimensional observation and growth kinetics of proeutectoid ferrite formed at austenite grain boundary in a low carbon microalloyed steel
    Wu, K. M.
    Guo, A. M.
    Cheng, L.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4578 - +
  • [45] Characteristics and Kinetics of Bainite Transformation Behaviour in a High-Silicon Medium-Carbon Steel above and below the Ms Temperature
    Pashangeh, Shima
    Ghasemi Banadkouki, Seyed Sadegh
    Somani, Mahesh
    Komi, Jukka
    MATERIALS, 2022, 15 (02)
  • [46] Kinetics modeling of delta-ferrite formation and retainment during casting of supermartensitic stainless steel
    Niessen, Frank
    Tiedje, Niels S.
    Hald, John
    MATERIALS & DESIGN, 2017, 118 : 138 - 145
  • [47] Effect of integrated austempering and Q&P treatment on the transformation kinetics, microstructure and mechanical properties of a medium-carbon steel
    Liu, Man
    Hu, Haijiang
    Kern, Maximilian
    Lederhaas, Bernd
    Xu, Guang
    Bernhard, Christian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 869
  • [48] Phase-field modeling of Widmanstatten ferrite formation during isothermal transformation in low carbon steels
    Yan, Wei
    Xiao, Namin
    Chen, Yun
    Li, Dianzhong
    COMPUTATIONAL MATERIALS SCIENCE, 2014, 81 : 503 - 509
  • [49] Microstructure and mechanical properties of a medium-carbon bainitic steel treated by quenching and two-step bainitic isothermal transformation below Ms
    Li, Qiangguo
    Zhang, Yanan
    An, Xuguang
    IRONMAKING & STEELMAKING, 2022, 49 (03) : 268 - 275
  • [50] Modelling of kinetics and dilatometric behaviour of austenite formation in a low-carbon steel with a ferrite plus pearlite initial microstructure
    F. G. Caballero
    C. Capdevila
    C. García De Andrés
    Journal of Materials Science, 2002, 37 : 3533 - 3540
12345