Modeling of kinetics of isothermal idiomorphic ferrite formation in a medium-carbon vanadium-titanium microalloyed steel

被引:0
作者
C. Capdevila
F. G. Caballero
C. García de Andrés
机构
[1] Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC),the Department of Physical Metallurgy
来源
Metallurgical and Materials Transactions A | 2001年 / 32卷
关键词
Ferrite; Austenite; Material Transaction; Pearlite; Nucleation Site;
D O I
暂无
中图分类号
学科分类号
摘要
The present article is concerned with the theoretical and experimental study of the growth kinetics of idiomorphic ferrite in a medium-carbon vanadium-titanium microalloyed steel. A theoretical model is presented to calculate the evolution of isothermal austenite-to-idiomorphic ferrite transformation with time for a given temperature. Moreover, the nature, size, and distribution of the inclusions that are responsible for the intragranular nucleation of idiomorphic ferrite have been characterized by scanning electron microscopy (SEM). Finally, the influence of austenite grain size in the isothermal decomposition of austenite in idiomorphic ferrite has been thoroughly analyzed. An excellent agreement (higher than 90 pct in R2) has been obtained between the experimental and predicted values of the volume fraction of idiomorphic ferrite.
引用
收藏
页码:1591 / 1597
页数:6
相关论文
共 50 条
  • [31] Microstructural and Dilatational Changes during Tempering and Tempering Kinetics in Martensitic Medium-Carbon Steel
    Minsu Jung
    Seok-Jae Lee
    Young-Kook Lee
    Metallurgical and Materials Transactions A, 2009, 40 : 551 - 559
  • [32] Kinetics and formation mechanisms of intragranular ferrite in V-N microalloyed 600 MPa high strength rebar steel
    Zhang, Jing
    Wang, Fu-ming
    Li, Chang-rong
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2016, 23 (04) : 417 - 424
  • [33] Abnormal mechanical behavior of a medium-carbon steel under strong ferrite-pearlite-martensite triple-phase microstructures
    Ghorabaei, A. Sabet
    Banadkouki, S. S. Ghasemi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 700 : 562 - 573
  • [34] Detection and analysis of magnetic particle testing defects on heavy truck crankshaft manufactured by microalloyed medium-carbon forging steel
    Lu, Jin-long
    Cheng, Guo-guang
    Wu, Meng
    Yang, Guo
    Che, Ju-long
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2020, 27 (05) : 608 - 616
  • [35] Origin of abnormal formation of pearlite in medium-carbon steel under nonequilibrium conditions of heating
    D. A. Mirzaev
    I. L. Yakovleva
    N. A. Tereshchenko
    V. N. Urtsev
    V. N. Degtyarev
    A. V. Shmakov
    The Physics of Metals and Metallography, 2016, 117 : 572 - 578
  • [36] Origin of abnormal formation of pearlite in medium-carbon steel under nonequilibrium conditions of heating
    Mirzaev, D. A.
    Yakovleva, I. L.
    Tereshchenko, N. A.
    Urtsev, V. N.
    Degtyarev, V. N.
    Shmakov, A. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2016, 117 (06) : 572 - 578
  • [37] Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions
    J. M. Cabrera
    A. Al Omar
    J. M. Prado
    J. J. Jonas
    Metallurgical and Materials Transactions A, 1997, 28 : 2233 - 2244
  • [38] Kinetics of Austenite Formation in a Medium-Carbon, Low-Alloy Steel with an Initial Martensite Microstructure: Influence of Prior Austenite Grain Size
    Rajakrishnan, Navneeth
    Sadeghifar, Morteza
    Bhattacharjee, Pinaki
    Champliaud, Henri
    Jahazi, Mohammad
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2025, 9 (01):
  • [39] Subcritical Spheroidization Annealing of Cold-Rolled Cr-Mo Microalloyed Medium-Carbon Steel with Different Initial Microstructure
    Qi, Min
    Wu, Hongyan
    Du, Linxiu
    Zhang, Xiaolei
    Zhang, Zhixin
    Zhang, Mingbo
    STEEL RESEARCH INTERNATIONAL, 2023, 94 (05)
  • [40] Kinetics and formation mechanisms of intragranular ferrite in V?N microalloyed 600 MPa high strength rebar steel
    Jing Zhang
    Fu-ming Wang
    Chang-rong Li
    InternationalJournalofMineralsMetallurgyandMaterials, 2016, 23 (04) : 417 - 424