Measuring in-plane micro-motion of micro-structure using optical flow

被引：0

作者：

Jin C. ^{[1
]}

Jin S. ^{[2
]}

Li D. ^{[2
]}

Wang J. ^{[1
]}

机构：

[1] College of Information Science and Technology, Beijing University of Chemical Technology

[2] State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University

来源：

Transactions of Tianjin University | 2009年 / 15卷 / 01期

关键词：

Label field; Micro-electronic mechanical system (MEMS); Micro-motion; Optical flow; Stroboscopic imaging;

D O I：

10.1007/s12209-009-0004-7

中图分类号：

学科分类号：

摘要：

Optical flow method is one of the most important methods of analyzing motion images. Optical flow field is used to analyze characteristics of motion objects. According to motion features of micro-electronic mechanical system (MEMS) micro-structure, the optical algorithm based on label field and neighborhood optimization is presented to analyze the in-plane micro-motion of micro-structure. Firstly, high speed motion states for each frequency segment of micro-structure in cyclic motion are frozen based on stroboscopic principle. Thus a series of dynamic images of micro-structure are obtained. Secondly, the presented optical algorithm is used to analyze the image sequences, and can obtain reliable and precise optical field and reduce computing time. As micro-resonator of testing object, the phase-amplitude curve of micro-structure is derived. Experimental results indicate that the measurement precision of the presented algorithm is high, and measurement repeatability reaches 40 nm under the same experiment condition. © Tianjin University and Springer-Verlag 2009.

引用

页码：19 / 22

页数：3

共 10 条

[1]

Burns D.J., Helbig H.F., A system for automatic electrical and optical characterization of microelectromechanical devices, J Microelectromech Syst, 8, 4, pp. 473-482, (1999)

[2]

Rembe C., Muller R.S., Measurement system for full three-dimensional motion characterization of MEMS, J Microelectromech Syst, 11, 5, pp. 479-488, (2002)

[3]

Rembe C., Tibken B., Hofer E.P., Analysis of the dynamics in microactuators using high-speed cine photomicrography, J Microelectromech Syst, 10, 1, pp. 137-145, (2001)

[4]

Rembe C., der Wiesche A.S., Beuten M., Et al., Investigations of nonreproducible phenomena in thermal ink jets with real high speed cine photomicrography, J Imaging Sci, 43, 4, pp. 325-331, (1999)

[5]

Bosseboeuf A., Petitgrand S., Application of microscopic interferometry techniques in the MEMS field, Proc SPIE, 5145, pp. 1-16, (2003)

[6]

Hu C., Hu X., Jin C., Et al., Stroboscopic synchronous control system in MEMS dynamic testing, Journal of Tianjin University, 38, 1, pp. 47-51, (2005)

[7]

Hu X., Li D., Guo T., Et al., MEMS test system based on virtual instrument technology, Transactions of Tianjin University, 13, 2, pp. 88-92, (2007)

[8]

Jin C., Jin S., Li D., Et al., Measurement technique of in-plane motion for micro-structure based on machine micro-vision, Journal of Tianjin University, 38, 3, pp. 248-252, (2005)

[9]

Jin C., Li D., Jin S., Et al., Measurement technique of in-plane motion for MEMS based on machine micro-vision, Chinese Journal of Scientific Instrument, 26, 8, pp. 771-774, (2005)

[10]

Chen Z., Hu X., Jin C., Et al., Nanoscale measurement technique of in-plane motion for MEMS based on phase correlation method, Proceedings of the Sixth International Symposium on Instrumentation and Control Technology, pp. 1-6, (2006)

← 1 →