A computer-aided inspection planning system for on-machine measurement - Part II: Local inspection planning

被引：25
作者：
Cho M.-W. [1 ]
Lee H. [1 ]
Yoon G.-S. [1 ]
Choi J.-H. [1 ]
机构：
[1] Division of Mechanical Engineering, Inha University, Nam-gu, Incheon 402-751
来源：
KSME International Journal | 2004年 / 18卷 / 8期
关键词：
Collision Avoidance; Computer-Aided Inspection Planning (CAIP); Geometric Feature; On-Machine Measurement (OMM);
D O I：
10.1007/BF02984250
中图分类号：
学科分类号：
摘要：
As a part II of theis research, new local inspection planning strategy is proposed in this paper based on the proposed inspection feature extraction method. In the local inspection planning stage, each feature is decomposed into its constituent geometric elements for more effective inspection planning. The local inspection planning for the decomposed features are performed to determine: (1) the suitable number of measuring points, (2) their locations, and (3) the optimum probing paths to minimize measuring errors and times. The fuzzy set theory, the Hammersley's algorithm and the TSP method are applied for the local inspection planning. Also, a new collision checking algorithm is proposed for the probe and/or probe holder based on the Z-map concept. Finally, the results are simulated and analyzed to verify the effectiveness of the proposed methods.
引用
收藏
页码：1358 / 1367
页数：9
相关论文
共 14 条
  • [1] Caskey G., Hari Y., Hocken R., Palanivelu D., Raja J., Wilson R., Chen K., Yang J., Sampling techniques for coordinate measuring machine, Design and Manufacturing Systems Conference, pp. 779-786, (1990)
  • [2] Chang T.C., Wysk R.A., An Introduction to Process Planning Systems, (1985)
  • [3] Cho M.W., Kim K., New inspec tion planning strategy for sculptured surfaces using coordinate measuring machine, International Journal of Production Research, 33, 2, pp. 427-444, (1995)
  • [4] Cho M.W., Seo T.I., Inspection planning strategy for the on-machine measurement process based on CAD/CAM/CAI integration concept, The International Journal of Advanced Manufacturing Technology, 19, pp. 607-617, (2002)
  • [5] Cho M.W., Seo T.I., Kim J.D., Kwon O.Y., Reverse engineering of compound surfaces using boundary detection method, KSME International Journal, 14, 10, pp. 1104-1113, (2000)
  • [6] Descotte Y., Latombe J.C., GARI: An Expert System for Process Planning, pp. 329-345, (1984)
  • [7] Lee G., Mou J., Shen Y., Sampling strategy design for dimensional measurement of geometric features using coordinate measuring machine, International Journal of Machine Tools and Manufacturing, 37, 7, pp. 917-934, (1997)
  • [8] Lee J.W., Kim M.K., Kim K., Optimal probe path generation and new guide point selection methods, Engineering Applica Tion of Artificial Intelligence, 7, 4, pp. 439-445, (1994)
  • [9] Lee K.I., Lee H., Noh S.D., Shim Y.B., Cho H.S., A process planning system using group technology and rule-base, IE Interfaces, Korean Institute of Industrial Engineers, 8, 3, pp. 221-230, (1995)
  • [10] Menq C.H., Yau H.T., Lai G.Y., Miller R.A., Statistical evaluation of form tolerances using discrete measurement data, ASME Winter Annual Meeting, 47, pp. 135-149, (1990)
12