An efficient eco-friendly adsorbent material based on waste copper slag-biomass ash geopolymer: dye sorption capacity and sustainable properties

The primary intent of the research is to comprehensively assess the environmental benefits and cost dynamics associated with the adsorption process of CS-RHA (Copper Slag and Rice Husk Ash) to produce a novel geopolymer adsorbent material for application in wastewater treatment. The geopolymer forms a polyiron sialate network under alkali activation by dissolving fayalite, and aluminium silicate to ferro-ferri silicate hydrate gel. The mechanical strength, leaching characteristics, and microstructure of the geopolymer were determined using XRD and FTIR, and magnetic properties by VSM as well surface properties were derived from BET surface area and zeta potential. Recognizing the critical role of sodium iron silicate hydrate (NFS) in the sorption of methylene blue (MB) dyestuff, batch experiments were carried out using different adsorbents. The results indicated that the dye removal efficiency increased from 60% in control samples (FS) to 98% for the blend (FS1) under different pH values. The data was found to fit with the nonlinear form of Freundlich isotherm and follow pseudo-second-order kinetics. The active adsorption sites were deduced as -O-Fe-O-Si-O-Na and Si-OH groups. The addition of RHA increases the adsorption capacity of the geopolymer in a short time through chemical adsorption. The significant negative surface charge promotes MB adsorption via improved electrostatic attraction. The spent adsorbents were recovered through magnetic separation with a retrieval rate of 80-85% and active sites were rejuvenated by calcination. Consequently, waste copper slag emerges as a promising adsorbent with minimum potential ecological risk and high effective recycling capacity.