Taguchi method prediction of effect of processing parameters on nanoparticle size in chemical vapor condensation process

被引：0
|
作者：
A. Tavakoli
M. Sohrabi
A. Kargari
Chul-Jin Choi
机构：
[1] Amirkabir University of Technology,Department of Chemical Engineering
[2] Korea Institute of Materials Science,undefined
来源：
Metals and Materials International | 2009年 / 15卷
关键词：
nanoparticle; Taguchi method; chemical vapor condensation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The Taguchi method has been applied to investigate the effect of various operating parameters such as decomposition temperature, bubbler temperature, carrier gas flow rate, precursor flow rate and pressure on particle size in the Chemical Vapor Condensation process. Also, the effect and contribution of each pertinent parameter on particle size and the interaction among them was determined by Taguchi analysis. It was observed that the decomposition temperature was the most significant process parameter affecting the particle size. Also, the predicted nanoparticle size was in good agreement with that found in the experiment.
引用
收藏
页码：877 / 880
页数：3
相关论文
共 50 条
  • [1] Taguchi Method Prediction of Effect of Processing Parameters on Nanoparticle Size in Chemical Vapor Condensation Process
    Tavakoli, A.
    Sohrabi, M.
    Kargari, A.
    Choi, Chul-Jin
    METALS AND MATERIALS INTERNATIONAL, 2009, 15 (05) : 877 - 880
  • [2] Particle size prediction of magnesium nanoparticle produced by inert gas condensation method
    Yu Wen
    Dehong Xia
    Journal of Nanoparticle Research, 2018, 20
  • [3] Particle size prediction of magnesium nanoparticle produced by inert gas condensation method
    Wen, Yu
    Xia, Dehong
    JOURNAL OF NANOPARTICLE RESEARCH, 2017, 20 (01)
  • [4] Application of the Taguchi analytical method for optimization of effective parameters of the chemical vapor deposition process controlling the production of nanotubes/nanobeads
    Sharon, M
    Apte, PR
    Purandare, SC
    Zacharia, R
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2005, 5 (02) : 288 - 295
  • [5] Determining the effect of process parameters on particle size in mechanical milling using the Taguchi method: Measurement and analysis
    Canakci, Aykut
    Erdemir, Fatih
    Varol, Temel
    Patir, Adnan
    MEASUREMENT, 2013, 46 (09) : 3532 - 3540
  • [6] Shrinkage Effect of Vacuum Casting Process Parameters using Taguchi Method
    Bin Ahmad, Mohd Nazri
    Maidin, Nurul Am Binti
    Rahman, Mohd Hidayat Bin Ab
    Bin Osman, Mohd Hairizal
    Bin Wahid, Mohammad Khalid
    Basir, Mohamad Faris Bin Mohd
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2019, 11 (03): : 248 - 254
  • [7] Modeling for particle size prediction and mechanism of silicon nitride nanoparticle synthesis by chemical vapor deposition
    Wen, Yu
    Xia, Dehong
    Xuan, Weiwei
    AEROSOL SCIENCE AND TECHNOLOGY, 2017, 51 (07) : 845 - 855
  • [8] Taguchi Method Optimization of Parameters for Growth of Nano Dimensional SiC Wires by Chemical Vapor Deposition Technique
    Prakash, Jyoti
    Ghosh, Sunil K.
    Sathiyamoorthy, D.
    Venugopalan, R.
    Paul, B.
    CURRENT NANOSCIENCE, 2012, 8 (01) : 161 - 169
  • [9] Kinetics and mechanisms of nanoparticle formation and growth in vapor phase condensation process
    Simchi, A.
    Ahmadi, R.
    Reihani, S. M. Seyed
    Mahdavi, A.
    MATERIALS & DESIGN, 2007, 28 (03) : 850 - 856
  • [10] Effect of Processing Parameters on PP/EPDM/Organoclay Nanocomposites Using Taguchi Analysis Method
    Khosrokhavar, Ramin
    Naderi, Ghasem
    Bakhshandeh, Gholam Reza
    Ghoreishy, Mir Hamid Reza
    IRANIAN POLYMER JOURNAL, 2011, 20 (01) : 41 - 53
12345