Reliability analysis of a wastewater treatment plant using fault tree analysis and Monte Carlo simulation

被引:0
|
作者
Masoud Taheriyoun
Saber Moradinejad
机构
[1] Isfahan University of Technology,Department of Civil Engineering
[2] South Tehran Branch,Young Researchers and Elite Club
[3] Islamic Azad University,undefined
来源
关键词
Reliability; Wastewater treatment plant; Fault tree analysis (FTA); Minimal cut set; Monte Carlo analysis;
D O I
暂无
中图分类号
学科分类号
摘要
The reliability of a wastewater treatment plant is a critical issue when the effluent is reused or discharged to water resources. Main factors affecting the performance of the wastewater treatment plant are the variation of the influent, inherent variability in the treatment processes, deficiencies in design, mechanical equipment, and operational failures. Thus, meeting the established reuse/discharge criteria requires assessment of plant reliability. Among many techniques developed in system reliability analysis, fault tree analysis (FTA) is one of the popular and efficient methods. FTA is a top down, deductive failure analysis in which an undesired state of a system is analyzed. In this study, the problem of reliability was studied on Tehran West Town wastewater treatment plant. This plant is a conventional activated sludge process, and the effluent is reused in landscape irrigation. The fault tree diagram was established with the violation of allowable effluent BOD as the top event in the diagram, and the deficiencies of the system were identified based on the developed model. Some basic events are operator’s mistake, physical damage, and design problems. The analytical method is minimal cut sets (based on numerical probability) and Monte Carlo simulation. Basic event probabilities were calculated according to available data and experts’ opinions. The results showed that human factors, especially human error had a great effect on top event occurrence. The mechanical, climate, and sewer system factors were in subsequent tier. Literature shows applying FTA has been seldom used in the past wastewater treatment plant (WWTP) risk analysis studies. Thus, the developed FTA model in this study considerably improves the insight into causal failure analysis of a WWTP. It provides an efficient tool for WWTP operators and decision makers to achieve the standard limits in wastewater reuse and discharge to the environment.
引用
收藏
相关论文
共 50 条
  • [1] Reliability analysis of a wastewater treatment plant using fault tree analysis and Monte Carlo simulation
    Taheriyoun, Masoud
    Moradinejad, Saber
    ENVIRONMENTAL MONITORING AND ASSESSMENT, 2015, 187 (01)
  • [2] Fault Tree Reliability Analysis of a Micro-grid Using Monte Carlo Simulations
    Shi, Xiaofang
    Bazzi, Ali M.
    2015 IEEE POWER AND ENERGY CONFERENCE AT ILLINOIS (PECI), 2015,
  • [3] A methodology for reliability assessment of substations using fault tree and Monte Carlo simulation
    Jair D. Barbosa
    Ricardo C. Santos
    Jesus F. A. Romero
    Patricia T. L. Asano
    Antonio V. S. Neto
    João B. Camargo
    Jorge R. Almeida
    Paulo S. Cugnasca
    Electrical Engineering, 2019, 101 : 57 - 66
  • [4] A methodology for reliability assessment of substations using fault tree and Monte Carlo simulation
    Barbosa, Jair D.
    Santos, Ricardo C.
    Romero, Jesus F. A.
    Asano, Patricia T. L.
    Neto, Antonio V. S.
    Camargo, Joao B.
    Almeida, Jorge R.
    Cugnasca, Paulo S.
    ELECTRICAL ENGINEERING, 2019, 101 (01) : 57 - 66
  • [5] Risk Assessment of Water Treatment Plants Using Fuzzy Fault Tree Analysis and Monte Carlo Simulation
    Tabesh, Massoud
    Roozbahani, Abbas
    Hadigol, Farhad
    Ghaemi, Elham
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2022, 46 (01) : 643 - 658
  • [6] Risk Assessment of Water Treatment Plants Using Fuzzy Fault Tree Analysis and Monte Carlo Simulation
    Massoud Tabesh
    Abbas Roozbahani
    Farhad Hadigol
    Elham Ghaemi
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2022, 46 : 643 - 658
  • [7] Dynamic fault tree analysis using Monte Carlo simulation in probabilistic safety assessment
    Rao, K. Durga
    Gopika, V.
    Rao, V. V. S. Sanyasi
    Kushwaha, H. S.
    Verma, A. K.
    Srividya, A.
    RELIABILITY ENGINEERING & SYSTEM SAFETY, 2009, 94 (04) : 872 - 883
  • [8] A fuzzy-Monte Carlo simulation approach for fault tree analysis
    Zonouz, Saman Aliari
    Miremadi, Seyed Ghassem
    2006 PROCEEDINGS - ANNUAL RELIABILITY AND MAINTAINABILITY SYMPOSIUM, VOLS 1 AND 2, 2006, : 428 - +
  • [9] FPGA-based Monte Carlo simulation for fault tree analysis
    Ejlali, A
    Miremadi, SG
    MICROELECTRONICS RELIABILITY, 2004, 44 (06) : 1017 - 1028
  • [10] Reliability Assessment of Redundant Electrical Power Supply Systems using Fault Tree Analysis, Reliability Block Diagram, and Monte Carlo Simulation Methods
    Benabid, Rabah
    Merrouche, Djemai
    Bourenane, Aissa
    Alzbutas, Robertas
    PROCEEDINGS 2018 3RD INTERNATIONAL CONFERENCE ON ELECTRICAL SCIENCES AND TECHNOLOGIES IN MAGHREB (CISTEM), 2018, : 323 - 329