Sintering effects on dielectric properties of Zn-doped CaCu3Ti4O12 ceramic synthesized by modified sol-gel route

被引：0
|
作者：
Laxman Singh
U. S. Rai
Alok Kumar Rai
K. D. Mandal
机构：
[1] Banaras Hindu University,Department of Chemistry, Faculty of Science
[2] Chonnam National University,Department of Materials Science and Engineering
[3] Indian Institute of Technology,Department of Applied Chemistry
[4] BHU,undefined
来源：
Electronic Materials Letters | 2013年 / 9卷
关键词：
sintering; grain size; dielectric properties; perovskites; capacitors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
CaCu2.90Zn0.10Ti4O12 ceramic was synthesized by a novel semi-wet route and calcined at 800°C in air for 8 h. The obtained powder was divided into three parts and sintered in air at 950°C for 6 h, 8 h, and 12 h, separately. XRD results confirmed the single phase formation of all the sintered samples with similar cubic structure of CaCu3Ti4O12 (CCTO). Scanning electron micrographs of the CaCu2.9Zn0.1Ti4O12 ceramic sintered for 6 h shows bimodal grain size distribution. Increasing the sintering time significantly promotes the grain growth and microstructural densification. The sintering duration was found to have tremendous influence on microstructure and dielectric properties of CaCu2.90Zn0.10Ti4O12 ceramic. The CaCu2.9Zn0.1Ti4O12 ceramic sintered for 12 h exhibited high dielectric constant εr ∼ 5971 at 1 kHz and room temperature. It is found that εr is independent at high frequency and weakly dependent on temperature.
引用
收藏
页码：107 / 113
页数：6
相关论文
共 50 条
  • [21] Giant dielectric properties of CaCu3Ti4O12 ceramics synthesized by solid state reaction route
    Parida, A. P. Kajal
    Kumar, Pawan
    PROCESSING AND APPLICATION OF CERAMICS, 2023, 17 (04) : 393 - 399
  • [22] Effects of LiF addition on microstructure and dielectric properties of CaCu3Ti4O12 ceramics
    Porfirio, T. C.
    Muccillo, E. N. S.
    CERAMICS INTERNATIONAL, 2016, 42 (10) : 12005 - 12009
  • [23] Effect of sintering temperature properties of CaCu3Ti4O12 on the dielectric ceramics
    Aoyagi, Rintaro
    Iwata, Makoto
    Maeda, Masaki
    FERROELECTRICS, 2007, 356 : 382 - 386
  • [24] Preparation of CaCu3Ti4O12 ceramics with low dielectric loss and giant dielectric constant by the sol-gel technique
    Li, Yanyan
    Liang, Pengfei
    Chao, Xiaolian
    Yang, Zupei
    CERAMICS INTERNATIONAL, 2013, 39 (07) : 7879 - 7889
  • [25] Multilayer ceramic capacitors with CaCu3Ti4O12 dielectric
    Kulawik, J.
    Szwagierczak, D.
    Synkiewicz, B.
    2012 INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS HELD JOINTLY WITH 11TH IEEE ECAPD AND IEEE PFM (ISAF/ECAPD/PFM), 2012,
  • [26] Influence of sintering conditions and CuO loss on dielectric properties of CaCu3Ti4O12 ceramics
    Zhao, Jingchang
    Zhao, Heyun
    Zhu, Zhongqi
    MATERIALS RESEARCH BULLETIN, 2019, 113 : 97 - 101
  • [27] Effects of cation stoichiometry on the dielectric properties of CaCu3Ti4O12
    Kwon, Seunghwa
    Huang, Chien-Chih
    Subramanian, M. A.
    Cann, David P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 473 (1-2) : 433 - 436
  • [28] Thermal and electrical properties of CaCu3Ti4O12 synthesized by soft chemistry route
    Porfirio, T. C.
    Muccillo, E. N. S.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2018, 133 (02) : 851 - 857
  • [29] Poly(vinylidene fluoride)/CaCu3Ti4O12 and La doped CaCu3Ti4O12 composites with improved dielectric and mechanical properties
    Srivastava, Anshuman
    Jana, Karun Kumar
    Maiti, Pralay
    Kumar, Devendra
    Parkash, Om
    MATERIALS RESEARCH BULLETIN, 2015, 70 : 735 - 742
  • [30] Microwave assisted sintering of CaCu3Ti4O12
    Hutagalung, Sabar D.
    Ikhwan, M.
    Ibrahim, M.
    Ahmad, Zainal A.
    CERAMICS INTERNATIONAL, 2008, 34 (04) : 939 - 942
12345