Electrical discharge machining studies on reactive sintered FeAl

被引：0
作者：
A. K. Khanra
S. Patra
M. M. Godkhindi
机构：
[1] Indian Instituteof Technology,Department of Metallurgical and Materials Engineering
[2] Indian Instituteof Technology,Central Workshop and Instrument Service
来源：
Bulletin of Materials Science | 2006年 / 29卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
bdElectrical discharge machining (EDM) studies on reactive sintered FeAl were carried out with different process parameters. The metal removal rate and tool removal rate were found to increase with the applied pulse on-time. The surface roughness of machined surface also changed with the applied pulse on-time. XRD analysis of machined surface of sintered FeAl showed the formation of Fe3C phase during the EDM process. The debris analysis was used to identify the material removal mechanism occurring during the EDM of sintered FeAl.
引用
收藏
页码：277 / 280
页数：3
相关论文
共 50 条
  • [41] Machining of low electrical conductive materials by wire electrical discharge machining (WEDM)
    Kozak, J
    Rajurkar, KP
    Chandarana, N
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 149 (1-3) : 266 - 271
  • [42] STUDY ON THE DRY ELECTRICAL DISCHARGE MACHINING
    Besliu, Irina
    Schulze, Hans-Peter
    Coteata, Margareta
    Amarandei, Dumitru
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 1107 - 1110
  • [43] Modeling and simulation of electrical discharge machining
    Weingaertner, E.
    Kuster, F.
    Wegener, K.
    1ST CIRP GLOBAL WEB CONFERENCE: INTERDISCIPLINARY RESEARCH IN PRODUCTION ENGINEERING (CIRPE2012), 2012, 2 : 74 - 78
  • [44] Electrical discharge machining in jetted mist
    Gu, Lin
    Zhao, Wansheng
    Li, Li
    Xia, Yonggao
    PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 297 - 300
  • [45] Study on the dry electrical discharge machining
    Irina Beşliu
    Hans-Peter Schulze
    Margareta Coteaţă
    Dumitru Amarandei
    International Journal of Material Forming, 2010, 3 : 1107 - 1110
  • [46] Transition and Prospects of Electrical Discharge Machining
    Journal of the Institute of Electrical Engineers of Japan, 2022, 142 (03) : 158 - 161
  • [47] Mechanism of Electrical Discharge Machining Ablation
    Wang, Xiangzhi
    Liu, Zhidong
    Qiu, Mingbo
    Hui, Zhiguang
    Tian, Zongjun
    Huang, Yinhui
    MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (11-12) : 1367 - 1373
  • [48] Study on Dry Electrical Discharge Machining
    Skrabalak, Grzegorz
    Kozak, Jerzy
    WORLD CONGRESS ON ENGINEERING, WCE 2010, VOL III, 2010, : 2070 - 2075
  • [49] Turning by electrical discharge machining: A review
    Gohil, Vikas
    Puri, Y. M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (02) : 195 - 208
  • [50] Device for Wire Electrical Discharge Machining
    Bosoanca, Gheorghe
    Slatineanu, Laurentiu
    Coteata, Margareta
    Badanac, Ana
    Manole, Vasile
    ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, 2014, 657 : 569 - 573
12345