Method for Determining the Modulus of Elasticity for Gas Thermal Spray Coatings

被引：0
作者：
Nikolai A. Dolgov
机构：
[1] National Academy of Sciences of Ukraine,Institute of Strength Problems
来源：
Powder Metallurgy and Metal Ceramics | 2004年 / 43卷
关键词：
coating; substrate; modulus of elasticity; thickness; powder; plasma spraying; strain;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
We have studied the effect of coating thickness on the modulus of elasticity of the coatings. We have developed a technique for determining the modulus of elasticity for a coating under tension. The elasticity modulus of the coatings was determined in tests on standard metallic tensile specimens with a coating. We observed that as the coating thickness increases, its modulus of elasticity is reduced. We have shown that the relationship between the modulus of elasticity and the thickness of plasma spray coatings is described well by an exponential equation.
引用
收藏
页码：423 / 428
页数：5
相关论文
共 50 条
  • [41] Functional colored ceramic coatings obtained by thermal spray for decorative applications
    Dosta, S.
    Torrell, M.
    Cano, I. G.
    Guilemany, J. M.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (14) : 3685 - 3692
  • [42] Numerical analysis of the effect of the gas temperature on splat formation during thermal spray process
    El-Hadj, A. Abdellah
    Zirari, M.
    Bacha, N.
    APPLIED SURFACE SCIENCE, 2010, 257 (05) : 1643 - 1648
  • [43] HARDNESS AND ELASTIC MODULUS OF TITANIUM NITRIDE COATINGS PREPARED BY PIRAC METHOD
    Wu, Siyuan
    Wu, Shoujun
    Zhang, Guoyun
    Zhang, Weiguo
    SURFACE REVIEW AND LETTERS, 2018, 25 (01)
  • [44] Reinforcing Concrete with Carbon Nanotubes and Carbon Nanofibers: A Novel Method to Improve the Modulus of Elasticity
    Danoglidis, P. A.
    Konsta-Gdoutos, M. S.
    PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED AND EXPERIMENTAL MECHANICS, 2019, 5 : 98 - 99
  • [45] Determination of Modulus of Elasticity, Nanohardness and Residual Stresses in Brush-plated Gold and Silver Coatings on Copper Substrate
    Lille, Harri
    Koo, Jakub
    Ryabchikov, Alexander
    Veinthal, Renno
    Mikli, Valdek
    Sergejev, Fjodor
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2012, 18 (01): : 51 - 56
  • [46] An Improved Method for Determining Residual Stresses in Thin Hard Coatings
    Voronin, N. A.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2022, 51 (SUPPL 1) : S28 - S35
  • [47] Evaluation of Thermal Spray Alumina Coatings on Nickel Electrode Connector for Reprocessing Applications
    Shankar, A. Ravi
    Rao, Ch. Jagadeeswara
    Vetrivendan, E.
    Mallika, C.
    Mudali, U. Kamachi
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (02) : 297 - 307
  • [48] Granule spray process for fabrication of adherent, low thermal conductivity ceramic coatings
    Yun, Sae-Jung
    Kim, Jung Hwan
    Jang, Jongmoon
    Ahn, Cheol-Woo
    Yoon, Woon-Ha
    Min, Yuho
    Choi, Jong-Jin
    Hahn, Byung-Dong
    CERAMICS INTERNATIONAL, 2021, 47 (13) : 17921 - 17929
  • [49] Evaluation of Thermal Spray Alumina Coatings on Nickel Electrode Connector for Reprocessing Applications
    A. Ravi Shankar
    Ch. Jagadeeswara Rao
    E. Vetrivendan
    C. Mallika
    U. Kamachi Mudali
    Transactions of the Indian Institute of Metals, 2018, 71 : 297 - 307
  • [50] Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings
    Patel, Payank
    Alidokht, Sima A.
    Sharifi, Navid
    Roy, Amit
    Harrington, Kelly
    Stoyanov, Pantcho
    Chromik, Richard R.
    Moreau, Christian
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (04) : 1285 - 1301
12345