Improving performance of cBN cutting tools by increasing their damping properties

被引：0
作者：
L. N. Devin
A. A. Osadchii
机构：
[1] National Academy of Sciences of Ukraine,Bakul Institute for Superhard Materials
来源：
Journal of Superhard Materials | 2012年 / 34卷
关键词：
vibration; damping properties; cubic boron nitride; logarithmic decrement of vibration; wear; vibration acceleration; fine turning; hardened steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new tool design has been elaborated which includes special elements made of damping materials thus providing the tool with an increased vibration-damping ability. The paper addresses the influence of damping properties on the vibration amplitude, cBN tool life, and machined surface roughness.
引用
收藏
页码：328 / 335
页数：7
相关论文
共 50 条
[31]   Tribological coatings for improving cutting tool performance [J].
Strahin, B. L. ;
Doll, G. L. .
SURFACE & COATINGS TECHNOLOGY, 2018, 336 :117-122
[32]   The effect of cutting parameters and cutting tools on machining performance of carbon graphite material [J].
Tankus, Kani ;
Tascioglu, Emre ;
Atay, Gokhan ;
Brunken, Hayo ;
Kaynak, Yusuf .
MACHINING SCIENCE AND TECHNOLOGY, 2020, 24 (01) :96-111
[33]   RESEARCH ON CUTTING PERFORMANCE OF CERAMIC CUTTING TOOLS IN MILLING HIGH DENSITY FIBERBOARD [J].
Zhu, Zhaolong ;
Guo, Xiaolei ;
Na, Bin ;
Liang, Xingyu ;
Ekevad, Mats ;
Ji, Futang .
WOOD RESEARCH, 2017, 62 (01) :125-138
[34]   Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment [J].
Abdelrazek, Ali H. ;
Choudhury, I. A. ;
Nukman, Yusoff ;
Kazi, S. N. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (9-10) :4221-4245
[35]   Performance of nanolayer CrN/Ag coated cutting tools [J].
Yao, S. H. ;
Su, Y. L. ;
Kao, W. H. ;
Cheng, K. W. ;
Su, C. T. .
SURFACE ENGINEERING, 2011, 27 (03) :180-188
[36]   The Effect of Cutting Tool Geometry on Surface Integrity: A Case Study of CBN Tools and the Inner Surface of Bearing Rings [J].
Cepova, Lenka ;
Cep, Robert ;
Chalko, Leszek ;
Dvorackova, Stepanka ;
Trochta, Miroslav ;
Rucki, Miroslaw ;
Beranek, Libor ;
Mizera, Ondrej ;
Chyshkala, Volodymyr .
APPLIED SCIENCES-BASEL, 2023, 13 (06)
[37]   Study on Cutting Performance of High Performance Alumina Based Ceramic Tools [J].
Yu, Jinwei .
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS, 2019, 14 (06) :861-867
[38]   Performance evaluation of high-speed ultrasonic vibration cutting for improving machinability of Inconel 718 with coated carbide tools [J].
Peng, Zhenlong ;
Zhang, Xiangyu ;
Zhang, Deyuan .
TRIBOLOGY INTERNATIONAL, 2021, 155
[39]   Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools' cutting performance [J].
Bouzakis, K. -D. ;
Skordaris, G. ;
Bouzakis, E. ;
Tsouknidas, A. ;
Makrimallakis, S. ;
Gerardis, S. ;
Katirtzoglou, G. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (01) :587-590
[40]   Mass production and cutting performance of diamond coated cutting tools for machining titanium alloys [J].
Zhu, Haojie ;
Shen, Yi ;
Liu, Dongdong ;
Sun, Fanghong .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
12345