Improving performance of cBN cutting tools by increasing their damping properties

被引：0
作者：
L. N. Devin
A. A. Osadchii
机构：
[1] National Academy of Sciences of Ukraine,Bakul Institute for Superhard Materials
来源：
Journal of Superhard Materials | 2012年 / 34卷
关键词：
vibration; damping properties; cubic boron nitride; logarithmic decrement of vibration; wear; vibration acceleration; fine turning; hardened steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new tool design has been elaborated which includes special elements made of damping materials thus providing the tool with an increased vibration-damping ability. The paper addresses the influence of damping properties on the vibration amplitude, cBN tool life, and machined surface roughness.
引用
收藏
页码：328 / 335
页数：7
相关论文
共 50 条
  • [21] Cutting performance of binderless nano-polycrystalline cBN and PcBN milling tools for high-speed milling of hardened steel
    Wang, Dongqian
    Yin, Lu
    Haenel, Albrecht
    Teicher, Uwe
    Penter, Lars
    Seidel, Andre
    Harst, Simon
    Ihlenfeldt, Steffen
    CERAMICS INTERNATIONAL, 2023, 49 (22) : 34757 - 34773
  • [22] NEW GENERATION NANO-CBN CUTTING TOOL FOR INCREASING SUSTAINABILITY OF HARD TURNING PROCESS
    Nayeri, Mohammad Reza
    Abootorabi, Mohammad Mahdi
    SURFACE REVIEW AND LETTERS, 2022, 29 (10)
  • [23] Comparison Research on the Machinability of Hardened Steel when Dry Turning with Ceramic and CBN Cutting Tools
    Tu, Chunjuan
    Guo, Xuhong
    Wang, Wei
    Wang, Chihong
    ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 573 - 577
  • [24] The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite
    Stakhniv, N. E.
    JOURNAL OF SUPERHARD MATERIALS, 2013, 35 (03) : 166 - 174
  • [25] Cutting performance of titanium carbonitride cermet tools
    Zhang, Houan
    Tang, Siwen
    Yan, Hanhui
    Hu, Xiaoping
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2007, 25 (5-6) : 440 - 444
  • [26] Cutting performance of carbide tools with hybrid texture
    Hao, Xiuqing
    Chen, Xinwen
    Xiao, Sinong
    Li, Liang
    He, Ning
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (9-12) : 3547 - 3556
  • [27] Research on the Cutting Performance of ZrN Coated Tools
    Liu, Jianhua
    Feng, Yihua
    Shi, Lei
    Zhang, Qingyu
    MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1 AND 2, 2011, 228-229 : 1089 - +
  • [28] Improving surface wearing of tools by magnetization when cutting dry
    El Mansori, M
    Iordache, V
    Seitier, P
    Paulmier, D
    SURFACE & COATINGS TECHNOLOGY, 2004, 188 : 566 - 571
  • [29] Tool wear characteristics analysis of cBN cutting tools in high-speed turning of Inconel 718
    Tu, Luqiang
    Lin, Liangliang
    Liu, Chao
    Zheng, Tianchang
    Deng, Yadi
    Han, Lei
    An, Qinglong
    Ming, Weiwei
    Chen, Ming
    CERAMICS INTERNATIONAL, 2023, 49 (01) : 635 - 658
  • [30] Research on the cutting performance and parameter optimization of TiAIN coated cutting tools in cutting stainless steel
    Wei Shasha
    Wei Wei
    Lu Pingshan
    Lin Rongchuan
    MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2014, 488-489 : 277 - +
12345