Prospects for using annular fuel elements in nuclear power engineering

被引：17

作者：

Blinkov V.N. ^{[1
]}

Boltenko E.A. ^{[1
]}

Elkin I.V. ^{[1
]}

Melikhov O.I. ^{[1
]}

Solov'Ev S.L. ^{[1
]}

机构：

[1] Elektrogorsk Research Center for Safety of Nuclear Power Plants, Elektrogorsk, Moscow oblast 142530

来源：

Thermal Engineering | 2010年 / 57卷 / 03期

关键词：

Fuel Element; Fuel Assembly; Reactor Core; Heat Transfer Surface; Uranium Dioxide;

D O I：

10.1134/S0040601510030043

中图分类号：

学科分类号：

摘要：

Prospects for enhancing heat transfer in the core of reactor plants by using annular fuel elements are considered. Advantages of changing over to use of annular fuel elements are analyzed, and problems that must be solved are identified. It is shown that application of annular fuel elements makes it possible to increase the specific power of a reactor while keeping its safety indicators at a high level. © 2010 Pleiades Publishing, Ltd.

引用

页码：213 / 218

页数：5

共 16 条

[1]

Kirillov P.L., Bogoslovskaya G.P., Heat Exchange in Nuclear Power Installationss, (2000)

[2]

Et Al. G., Optimization of UO2 fueled PWR core design, Proceedings of Workshop on Advanced Reactors with Innovative Fuels (ARWIF-2005)

[3]

Zhao J., No H.C., Kazimi M.S., Mechanical analysis of high power internally cooled annular fuel, Nucl. Technol., 146, (2004)

[4]

Feng D., Hejzlar P., Kazimi M.S., Thermal hydraulic design of high power density fuel for PWRS, Proceedings of NURETH-10, (2003)

[5]

Hejzlar P., Driscoll M.J., Kazimi M.S., High performance annular fuel for pressurized water reactors, Trans. Amer. Nucl. Soc., 84, (2001)

[6]

Lee K.L., Chang H.S., A study of the conceptual design of a 1,500 MWe passive PWR with annular fuel, Proceedings of ICAPP'04, (2004)

[7]

Mildrum C.M., Economic evaluation of annular fuel for PWRs, Trans. Amer. Nucl. Soc., 35, (1980)

[8]

Caner M., Dugan E.T., ThO2-UO2 annular pins for high burnup fuels, Annals of Nuclear Energy, 27, 9, pp. 759-770, (2000)

[9]

Buas R.G., Annular fuel element for high temperature reactors, U.S. Patent, 3, 928, (1975)

[10]

Boltenko E.A., Burnout in annular channels with flow swirling, Teploenergetika, 11, pp. 25-30, (2003)

← 1 2 →